home Interior Design

DIY bird feeder made from boards. DIY bird feeder: a selection of ideas. Wall-mounted “cage” with grain mixture

From this article you can learn how to make bird feeders with your own hands: an overview of existing types of structures and general recommendations for their creation and placement, selection of suitable building materials, photos and drawings with a detailed description of the technology. The text contains unusual and original solutions that will allow you to create a comfortable and beautiful area for feeding birds in the garden or near the house.

If they want to improve the area near their house, many owners of summer cottages lay paved paths, lay out flower beds and flower beds, install benches and lanterns. All this creates comfort and coziness for the residents of the house. However, we should not forget about the small inhabitants of the garden, for whom, with the arrival of winter, it becomes more difficult to obtain food for themselves.

Making a bird feeder with your own hands will not only help birds overcome this difficult period, but will also add a certain charm to the garden. Using simple technologies, you can show your own imagination and create an original feeding house.

Advantages of homemade feeders:

the opportunity to take care of birds that find it difficult to obtain their own food;
decorative decoration of the yard;
an opportunity to instill in children a love of the environment and birds.

Moreover, such a decision can be implemented not only by owners of private and country houses, but also by residents of city apartments.

Is it profitable to buy a ready-made bird feeder: advantages and disadvantages

If you want to install a standard professionally made feeder in your yard, you can order the product from specialists. Experienced craftsmen will independently select high-quality materials and make the structure using special technologies.

Buyers are invited to choose a bird feeder with a design they like based on the picture. Such structures can have any size and shape. By purchasing a custom-made feeder, the consumer can be completely sure that it will meet his wishes and fit perfectly into the exterior of the yard.

Purchasing finished products comes with both advantages and disadvantages. The negative aspects of this include the high cost of professionally made feeders. In addition, the buyer deprives himself of the joys of the creative process and waiting for the birds to arrive. Therefore, many people prefer to create their own houses for feeding birds in their yard or near a window.

Note! The design of the feeder must be reliable, so it is advisable to select practical and durable materials for its construction that will protect the birds from precipitation and wind.

What requirements must a homemade bird feeder meet?

When choosing a specific design for a homemade feeder, you need to take into account not only the type of birds for which the design will be made, but also other nuances. Birds mainly rely on their vision, so the poured food should be visible to them from afar.

The design of the structure must be such that the grain is not covered with snow or blown by the wind. High sides and a roof will help to cope with this problem. It is unacceptable for moisture to get on the feed. Otherwise, the grains will become moldy and spoiled. It is desirable that there is protection from chipmunks and squirrels. In this case, the birds should not experience any difficulties when removing food.

Drawings of bird feeders, of which there are many on the Internet, can be successfully used as a visual aid for creating a beautiful design. First of all, you should pay attention to practical and convenient options. The food should not spill onto the ground, otherwise it will attract small predators such as stoats, weasels, and ferrets. Their presence poses a direct threat to birds.

If the structure will be used for temporary feeding in winter, it is better to hang it. Thus, the feeder will attract less sparrows, which find food much easier than other birds. Stationary structures are used for constant feeding. In this case, protection from predators is mandatory. It is desirable that the grain is located on a level area of sufficiently large size that maintains good stability.

Types of bird feeders: photos and descriptions of designs

The design of homemade feeders is practically unlimited. The main thing is that the design meets the basic requirements of practicality, reliability and safety.

Classification of bird feeders by type of design:

suspension;
area;
house;
bunker;
tray;
peeler

Each of these designs has its own characteristics and is designed for certain types of birds.

Original do-it-yourself bird feeders: photos of hanging structures

The designs of the suspensions are very simple. In this case, the food is suspended in a mesh case or on a thread. They are used primarily as tit feeders. Although other species of insectivorous birds, with the exception of woodpeckers, can also use dewlaps.

The most common version of “antifreeze” feeding is a piece of lard without spices and salt. There are also more nutritious mixtures that are designed for shelling birds. A ball made of seeds is suitable for them. Peanut oil or lard (gutter fat) is used as a binding component.

Note! You should not cast the feed mass into a beautiful mold or plastic cup and then freeze it. The ball is more comfortable for birds. This makes it much easier for them to cling and they don’t have to expend a lot of energy to keep themselves afloat while feeding.

It is most convenient to form a ball consisting of feed mass with your hands. This must be done in the cold. The fat will harden very quickly, so after forming a ball, you need to hang it up immediately.

Related article:

Drawings, interesting and practical solutions for creating fences in street and apartment conditions, taking into account the breed and size of the animal.

Hanging bird feeder crafts can be made with specific types of birds in mind. Great tits prefer garlands made from dried berries. They especially like rose hips. Peanuts in pods are allowed.

The best option for blue tits would be swing feeders. In this case, it is advisable to hang the balls on elastic and thin branches so that they balance.

The beautiful do-it-yourself bird feeders, made in the form of mobiles or movable sculptures, look original in the photo. Such designs can even attract great tits, which will not conflict with blue tits.

Hanging options made from cones are suitable for attracting bullfinches, shelling birds and waxwings. To make the feeder visible from afar, you can hang a bright bunch of rowan or viburnum on it. It is advisable to use a fertile cone for this. If this is not possible, any with ruffled scales will do. It needs to be doused with peanut butter. After this, food is placed between the scales and the cone can be hung. Even crossbills may like such cones.

You cannot use paper to create such structures, but you can make a beautiful bird feeder with your own hands from a thick base from a toilet paper roll. It is advisable to attach bright pieces of fabric or paper from below that will attract the attention of birds.

Convenient DIY bird feeders: photos of tray structures and platforms

Platform feeders are a flat surface on which food is placed. The advantage of such designs is that birds can see the presence of food from afar. However, there are some disadvantages to a DIY flat wooden bird feeder. Firstly, there are no fences to provide protection from the wind. As a result, large quantities of food swell and fall down. Secondly, nothing prevents sparrows from actively using these feeders.

The fact is that sparrows live in flocks. These nosy birds, unlike pigeons and crows, can freely penetrate small feeders and empty them, not giving a chance to other birds, for whom it is much more difficult to obtain food in winter. To eliminate this possibility, it is advisable to avoid the use of open structures.

Sparrows are very careful. In case of danger, they take off straight from their place steeply. Therefore, the best option would be a birdhouse made of cardboard or wood with a steep roof that has more overhang. It is desirable that the structure have low windows to provide birds with access to food. In this case, the sparrows will first have to flutter to the side before flying away, so such feeders are unattractive to them.

Helpful advice! In winter, birds could use a vitamin supplement. To do this, you can put pear and apple cores with seeds, viburnum berries, elderberries, rowan berries, the fibrous part of a pumpkin with seeds, dried rose hips, and grape seeds in the feeder. You can use cherry pits from compote.

For those birds that constantly live on the site, a home-made original tray-type bird feeder is suitable. In front of the tray (window that provides access to food), you can install a perch or landing pad.

There are two types of tray feeders:

With free access to the mixture.
With automatic feeding of food into the tray.

A window bird feeder with automatic feeding is much more practical than bunker structures. In this case, the food practically does not wake up. Trough structures are designed specifically for one type of bird. It is possible to use a feeder for several species of birds. However, creating such a structure will require not only appropriate skills and tools, but also ornithological knowledge.

DIY birdhouses: photos of birdhouses and similar structures

Feeders in the form of houses protect food well from snow. By equipping the structure with a roof, you can protect the inside from the wind and sparrows. But a beautiful bird feeder in the shape of a house does not provide protection against food spillage. Therefore, only those birds that are accustomed to feeding will be present on the site. For forest birds, this option is very inconvenient, because they are drawn to human habitation only in cases of crisis and may simply not notice grains that have spilled onto the ground.

A structure in the form of a house with a sloping roof can be made from a box. If possible, it is advisable to treat such a cardboard feeder with a diluted adhesive composition. For this purpose, PVA is suitable, which is mixed with water in a ratio of 1:3 or 1:5. The supports are made of sticks, which are also attached with glue. If everything is done correctly, such a feeder will last for several seasons. The structure is nailed to the tree.

A beautiful feeder with a pitched roof will be the best option for strong, large birds. These include nutcrackers, waxwings, jays and pigeons. All of them can sit quietly in a row during feeding, so it is better to equip the dining room with a long perch.

Wood or very thick pre-treated cardboard can be used as a manufacturing material. The design for large birds should be much larger than for ordinary birds. In this case, you need to select bird feeder drawings with dimensions that will suit them.

Note! A shoebox bird feeder is not suitable for feeding large birds. The cardboard in such designs is very thin. Strong birds will very quickly break the feeder while feeding.

Practical do-it-yourself feeders: photos of bunker structures and shellers

Bunker-type structures are the best option if an anti-sparrow feeder is required. In this case, the feeding area is limited in size, so the entire flock cannot accommodate. The sparrows will have no choice but to eat alternately with the company of other birds.

Unusual bunker-type bird feeders can have different designs. It is advisable that a product designed for small spotted woodpeckers and tits be equipped with a hard, narrow platform. Anti-sparrow versions are much wider and have a roof. Modern materials make it possible to create a bunker structure in just 5 minutes.

To make your own bottle feeder you will need a minimum set of tools and materials:

nylon thread;
bottle (PET);
Super glue;
plastic plate;
large needle;
knife and scissors.

Plastic is a very practical and durable material that is not afraid of moisture and frost. This feeder will last for several seasons.

Shelling feeders are less popular. They are designed for a specific type of bird. In this case, the feed is retained using a special metal mesh. The design can be improved by making it combined. For this purpose, the peeling feeder is combined with the tray version. Thanks to this, birds of different species can coexist in one area.

How to make bird feeders: choosing materials for work

Having decided on the type of future design, you need to decide what the feeder will be made of. A variety of materials can be used for these purposes. Everyone has many of them in their home, so you can not only create an original bird feeder with your own hands, but also do it at minimal cost.

The following materials are usually used to make poultry canteen:

plastic;
paper and cardboard;
wood;
plywood;
improvised materials (bottles, boxes, milk or juice bags, etc.).

Each of the listed materials is suitable for creating certain types of structures and has both advantages and disadvantages.

Features of bird feeders made from plastic bottles and trays

Plastic feeders are the most popular option. This material has many advantages.

Advantages of feeders made of plastic bottles and trays:

Availability of material.
The transparent walls of the structure make the food visible from afar.
Ease of processing.
Minimum amount of garbage and waste.
There is no need to use special tools.
High strength and durability.

Important! The roof of a plastic feeder in the form of a house should be opaque or at least matte. In case of danger, birds may not notice the transparent plane above and hit it.

A good way to create a small, visible bird feeder from scrap materials is to use old children's toys, such as blocks. They are made of polyethylene, so it is advisable to use superglue for fixation. Such designs have bright and rich colors, so it will be easy for birds to find food. Polyethylene is easy to process. To cut round holes in the walls, you can use a compass with two needles. Polyethylene is a slippery material, so it is advisable to equip the feeder with a perch.

As a plastic building material, you can use scraps of transparent polycarbonate that may have remained after renovations in the house. This feeder can be mounted on a window using suction cups from bathroom shelves.

Bird feeders made from bottles and other unsuitable containers deserve special attention. The main thing is that the design is well thought out. To ensure visibility of the feed, it is advisable to use a wide tray. The presence of a perch will make feeding birds more convenient. If you take a large tray and a capacious container, you will not have to frequently replenish food supplies. As a result, the birds will be less timid.

To make a bird feeder with your own hands from a plastic bottle, it is advisable to use a trough-shaped tray. In this case, spillage of feed will be insignificant. If you bend up the lid of the hatch that provides access to the food, the feeder will turn out to be anti-passerine. In this case, the plane that is formed at the top can be used to place vitamin supplements.

Features of making homemade feeders from a box

milk;
kefir;
juice, etc.

Despite the fact that these bags are made of cardboard, their walls are covered with film on both sides. Therefore, laminated feeders can withstand one winter.

Small bags left over from juice or milk are ideal as feeders for the following types of birds:

goldfinches;
tits;
granivores.

In this case, you must install a perch stick to make it easier for the birds to get food.

Helpful advice! To attract the Great Spotted Woodpecker to the tit feeder, just attach a wooden circle to the bottom of the valve. This will make it easier for the bird to attach itself to the structure.

Large bags can be used to make universal bird feeders. To do this, you need to cut a large opening so that the food can be seen from afar. If the feeder is hanging, it needs to be pierced with a perch. The structure from the package can be placed in a bush. In this case, a perch will not be required; its function will be performed by the branches.

Eco-friendly do-it-yourself bird feeders made of wood

The advantage of wooden feeders is their durability. Most often, such structures are stationary.

As a protective treatment you can use:

drying oil;
water-polymer composition;
mixture in the form of diluted PVA glue.

To build a bird feeder out of wood with your own hands, you will definitely need carpentry tools and skills in handling them. Traditional models look like a house. It is not recommended to put a flat roof on the feeder, as this will expose the food to weathering.

Standard house-shaped designs can be improved and specialized for a specific type of bird through minor changes. For example, a feeder with a gable roof without railings can be used as a public option. If you build a small sheathing around the perimeter, such a dining room will appeal to shelling birds. It quite realistically imitates natural feeding conditions. A similar model with a continuous low fence will achieve an anti-sparrow effect and protect food from the wind.

A design in which the roof has low slopes will also provide protection against swelling of the feed. Such a feeder will be used by sparrows only as a last resort.

An alternative to a suspended wood structure would be a DIY bird feeder made of plywood. To create it, you will also need wooden blocks with a section size of 3x3 or 3x4 cm. To avoid the use of lumber, you can make bars from strips of plywood by gluing. However, for stationary feeders on poles, it is preferable to use solid wood, since plywood in outdoor conditions will delaminate after a few seasons, regardless of the quality of the protective impregnation.

Helpful advice! If you use waterproof birch sheets to build a bird feeder from plywood, you can get a reliable and durable structure. This material perfectly withstands outdoor conditions.

DIY bird feeders from scrap materials

Unusual and original designs can be made from scrap materials, the creation of which can focus on design or functional features.

An ear of corn can be used as a feeder. To do this, a nail is passed through it. This version of a bird feeder made from scrap materials can simply be hung or made part of a stationary structure. Corn should be firm, preferably oilseed or fodder varieties. The smaller the grains, the better.

It is better to avoid using table sugar cobs, as they are harmful to birds. Their grains contain large amounts of sugar and starch. The corn feeder is designed for large frugivorous and granivorous birds, as well as shellers.

You can use Popsicle sticks as a building material to create a wooden bird feeder. During the summer season they can be accumulated in sufficient quantities. To make such a structure you will need string and PVA glue. You can install a pole of larger popsicle sticks on each side of the feeder. Thanks to this, the dining room can be used by 4 birds at the same time, for example, chickadees or siskins.

An excellent option would be a wicker basket-shaped feeder with a hanging lid. To create it you will need paper tubes, which can be made from old newspapers. The weaving technology is quite complex and labor-intensive, so not everyone will decide to take on the construction of such a feeder, but the result exceeds all expectations. To prevent paper straws from becoming soggy, they need to be treated with a protective compound (glue and stain).

A large metal tin can is also suitable for constructing a feeder. It is suspended on a rope in a horizontal position. To prevent food from spilling onto the ground, you need to install a small damper. The top part of the lid, bent in half, is suitable for this. You definitely need to install a perch.

Important! Regardless of the type of design, the feeder must be safe. Wooden models must be thoroughly sanded and all sharp corners must be rounded. Metal options can be wrapped with twine, which sits on the glue.

Making bird feeders: drawings, descriptions and technologies

Having decided on the type of design and material, you can begin the actual manufacture of the feeder. It is worth noting that not all types of grains are suitable for feeding birds. The favorite food of birds that stay for the winter are seeds of wild grasses. It is desirable that these are burdock plant species. A turnip seed is suitable, which can be collected in the summer or purchased ready-made at a pet store.

Homemade feeders can be filled with:

oats and millet;
small sunflower seeds (unroasted);
hemp and flax seeds;
dried pods of acacias that live in mid-latitudes (wisteria, honey locust, sophora, etc.);
pumpkin seeds;
dry pea pods (they must be ripe and firm);
pine nuts;
millet (in small doses);
seeds of deciduous trees such as ash, hornbeam, linden, maple, alder;
acorns and seeds of coniferous trees, for example, beech nuts, ruffled cones (if the feeder is designed for shellers).

Note! The use of rye, wheat and bread is not allowed. They are harmful to birds. Moreover, black bread is the most dangerous because it causes inflammation of the goiter. Porridges that swell greatly during cooking, such as buckwheat, pearl barley, and rice, are poorly received. The peel of any tropical fruits and citrus fruits is lethal to birds.

How to make a birdhouse with your own hands: assembling a wooden structure

To build a wooden birdhouse you will need skills in working with carpentry tools.

For work you will need the following materials:

wooden beam for racks (2x4.5 cm);
a square of plywood as flooring on the bottom (25x25 cm);
wooden pieces for roofing (22x35 cm, 2 pcs.);
fastening elements (adhesive, screws, nails).

It doesn’t hurt to first find a suitable drawing of the feeder, which will help you navigate when assembling the parts.

First, the base is assembled: sides and bottom. To do this, the bars, pre-cut according to the size of the bottom, are glued on the end sides and fixed with self-tapping screws. The result is a wooden frame. A pair of sides running parallel should be made longer than the bottom by about 5 cm. They will be used to install perches. The bottom is nailed to the frame using nails.

At the next stage of making a feeder with your own hands, stands are mounted from wood. To do this, you need to screw the corresponding parts on the inside of the box. The optimal length is 18-20 cm.

The rafter system is attached to the racks. To do this, you need to connect a pair of beams at right angles. To strengthen the place of fixation, the joint is secured with a piece of timber. The result is a right angle with equal sides. According to the drawing, it is necessary to make two such parts.

Helpful advice! To properly connect the parts of a wooden bird feeder when fastening the bars, you need to lay the flat, wide part on the table. After this, an additional element is attached to the top at the appropriate angle.

Then the rafters are attached to the posts using self-tapping screws. Next, the roof slopes are installed. To do this, two wooden elements are installed on the rafters. If you have a wooden corner available, you can make a ridge. A bird feeder made of wood needs a perch. To do this, sticks or window beads are glued between an elongated pair of sides.

This design can be either stationary or suspended. It can be installed on a pole or, by making a couple of holes in the ridge, hung on a wire.

How to make a bird feeder with your own hands from wood: plywood structure

An alternative to a wooden feeder is a structure made of plywood.

The material allows you to choose any modification:

open;
with a gable or flat roof;
with bunker compartment.

Plywood is a derivative of wood, but it is much cheaper and lighter in weight. Before you make a bird feeder from wood, you must select the appropriate drawing. In this case, you need to take into account the type of birds living in the region. Large birds such as magpies, pigeons and jays can eat all the food, leaving small birds without food. Therefore, if the feeder is designed for tits, the openings should be such that large species cannot reach the grains.

For work you will need the following tools and materials:

jigsaw;
sandpaper;

water-based adhesive composition;
nails and hammer;
plywood sheet;
timber with a section size of 2x2 cm.

In accordance with the drawing, markings are applied to the plywood sheet. After which all the parts are carefully cut out using a jigsaw. A square element of 25x25 cm will be used as a flooring for the bottom. To build the roof, you need to take larger parts, otherwise moisture will drain onto the feed. The edges of the resulting blanks must be sanded.

You need to cut 4 posts, each 25-30 cm long, from the timber. If the structure has a pitched (flat) roof, a pair of bars should be shortened by 2-3 cm. The cut is made at an angle. All joints between parts are treated with adhesive and then fastened with nails. The racks are installed on the bottom, and the sides are fixed to them. A roof is installed at the top of the racks. The structure can be installed permanently or suspended using a hook and hardware.

Helpful advice! If a wooden feeder will be opened with varnish, it is recommended to use a water-based composition for this so as not to harm the birds.

How to make a feeder with your own hands: hanging structure made of grain

Suspended structures made of grain are the simplest option. This design can be made in a few hours.

To work you will need:

raw bird food;
oat groats;
egg;
gelatin;
flour;
needle and thick thread;
thick cardboard and scissors;
pencil and molds for filling.

How to make an edible bird feeder with your own hands:

Draw the shape you like on the cardboard, for example, a square, circle, triangle, heart, etc.
Cut out the shape according to the markings.
Form a fastening by threading a needle and making a hole.
Prepare the adhesive mixture. To do this, mix the following ingredients: 1 tsp. honey, egg, 2 tbsp. l. oatmeal and a small amount of flour.
Leave the mixture for half an hour.
Apply the adhesive mixture over the cardboard base.
Mix grain feed with adhesive mass.
Apply the resulting mixture onto the cardboard base.

After this, the grain feeder should be placed in the refrigerator for several hours. Once the mixture has hardened, the products can be hung on tree branches in the yard.

There is another technology for making edible feeders:

Dissolve a packet of gelatin in warm water.
Pour food into it.
Place the resulting mass into molds.
Insert thread for hanging.
Place the molds in the refrigerator for several hours.

After hardening, the feeders are completely ready for use. To make it easier for birds to grab onto, the molds can be placed in bright mesh bags.

How to make a bird feeder from a plastic bottle

Every home has unnecessary plastic containers. Therefore, many people are thinking about creating a bottle feeder. The material is cut with scissors or a knife, and the design is transparent and very light. This option is especially convenient since there are several ways to create plastic feeders.

How to make a feeder from a plastic bottle:

A pair of holes are cut out on both sides of the bottle. They should be located symmetrically. The shape can be any: arch, square, circle, rectangle.
Spacers must be left between the holes.
You can make a rain canopy by making an inverted U-shaped slot and bending the plate upward.
The lower edge of the slots where the birds will land must be secured. To do this, the cut is covered with fabric insulating tape or adhesive tape.
In the lower part you need to make symmetrical holes.
A perch stick is inserted into the resulting holes.

This feeder can be mounted on a tree. To do this, the jumper is wrapped with rope, tape or other material.

Helpful advice! If you insert twine through the lid of a birdhouse from a bottle, having previously made holes in it, you can form a loop that will allow you to hang the structure on a tree branch.

Do-it-yourself bunker feeder from a plastic bottle

The bunker design is very rational. It allows you to fill up the feed mixture with a supply of several days. As the birds eat the grains, the additive will automatically flow into the tray.

To work, you will need a couple of bottles of the same capacity. Markings are applied to one container using a marker. Near the bottom, you need to make holes similar to those made in the previous version of the plastic feeder, and then remove 1/3 of the bottle (from above).

A pair of symmetrical holes are made in the upper part. These will be used to hang the feeder using ribbons or twine. The second bottle will contain food. In the narrowest part of this container, several holes should be made through which the grains will spill. Don't make the holes very large. If necessary, it is better to expand them later.

The corresponding bottle must be filled with the feed mixture, screw the cap into it and place it inside the container, which is cut off by 1/3. After this, twine is pulled through the holes and the structure is suspended from the tree.

How to make a bottle feeder: a simple design with a spoon

There is another version of the bunker design - a feeder with a spoon. A bottle with a capacity of 1.5-2 liters is suitable for this. First, you need to make a hole in the cork and stretch the twine through it. Using it, the structure will be suspended on a branch. Then you need to make holes symmetrically (one on each side of the bottle). They should be the size of a wooden spoon.

On the side where the deep part of the spoon will be placed, the hole needs to be slightly widened so that it is convenient for the birds to take food. All that remains is to fill the feeder with the selected feed mixture and hang it in a convenient place.

Helpful advice! To prevent the bunker feeder from accumulating moisture, several holes need to be made in the bottom. To do this, you can use a small nail or a hot needle.

How to make a bird feeder from a 5 liter bottle

5 liter water bottles can hold much more feed than standard containers. In addition, the large size of the container allows you to make several holes, so that a large number of birds can feed at the same time at the feeder.

To work you will need:

wire or ribbon for hanging;
clean bottle;
birdseed;
cutting tool, such as pruning shears, scissors or a utility knife.

First, a hole is made for hanging the structure. Its location will depend on the nature of the placement of the feeder on the tree:

Horizontally - a pair of wide holes are made (one near the neck, the other from the bottom).
Vertically - at a distance of 5-7 cm from the bottom of the bottle, you need to cut 3 rectangular holes or several square ones.

It is most convenient to hang the bottle by the neck. If the structure will be fixed in a horizontal position, you need to make two holes in the wall and, passing twine through them, fix the feeder to the tree. Plastic structures are very light. To prevent the bottle from being swayed by the wind, it is advisable to place ¼ of a brick at the bottom before pouring food into it.

Technology for creating a bunker feeder from a 5 liter bottle

To create a bunker feeder, you will need several bottles (5 l - 1 pc., 1.5 l - 2 pcs.), as well as a stationery knife, rope and marker. First, markings are applied to large containers. Using a marker, the area near the bottom is marked where the hole will be placed, which will serve as a taphole. It is best to make 2 small slots and one large one through which you can install a 1.5 liter bottle.

Then a U-shaped hole is cut upside down. The upper part should be folded back to form a protective canopy against rain. The lower edge of the opening is sealed with adhesive tape so that the birds do not get hurt during feeding.

In those areas where the bottle placed inside comes into contact with the bottom of a large container, as well as in areas slightly higher, you need to make holes. As the food is eaten, the grains will spill out through them. A round hole is made in the cap of a 5 liter bottle so that after screwing the thread, the neck of the inner container rises. Then you need to cut off the neck of the second bottle along with the top. The result should be a funnel. It should be placed on the neck of the inner bottle and screw on the cap. The feeder is ready.

Helpful advice! It is advisable to install a feeder under the roof to make the birds more comfortable. A canopy or gazebo is suitable for this.

How to make a feeder from a box: process description

A homemade bird feeder can be made from the simplest materials available. Almost every home contains boxes of food, shoes or electrical appliances. For work, it is advisable to select thick cardboard. An ideal option would be a bird feeder out of a box with a laminated coating, which will increase the service life of the structure.

The advantage of this method is that the box already has walls, a bottom and a roof. Therefore, the steps to convert it into a feeder will be minimal; you will only need to cut rectangular or square holes on the sides.

To make a bird feeder with your own hands from a box, you will need a utility knife or scissors, cord and tape. Since cardboard is short-lived and vulnerable to moisture, it should be wrapped with tape for protection. This is done after the feeder is ready. When holes are cut in the side walls to access the feed, you need to secure the cord and hang the feeder. To prevent the structure from swaying from the wind, you should put some pebbles or sand on the bottom.

You can change the technology slightly. In this case, the box lid is glued perpendicularly. As a result, it will serve as a stern stand. The second part of the box will replace the roof and fences. The structure must be sealed with tape.

Next you need to organize a mounting system for hanging. To do this, a pair of hooks is made from wire. A piece of wire is bent in half and the end makes a puncture through the “ceiling” part of the feeder. After this, the wire is twisted and bent on the inside. Now the feeder can be hung on a branch.

How to make a feeder from a juice or milk box

To create such a design, you will need a tetra pack bag for liquid food products, such as juice or milk.

List of necessary materials and tools for work:

wire for hanging or nylon rope;
a clean milk or juice carton;
adhesive plaster;
stationery knife or scissors;
marker.

The feeder should be comfortable for the birds, so markings are applied to the cardboard and a pair of holes of sufficient size are cut on opposite sides. The through space will allow birds to move and feed easily. For safety reasons, the window should be covered with adhesive tape.

Under the slots you need to pierce a hole with scissors and insert cardboard rolled into a tube into it. This will be a roost. The material for its manufacture can be taken from scraps left over from previous operations. In the corners you need to make small holes where the rope or wire will be stretched for hanging. A milk carton feeder can be tied to a branch or mounted on a tree trunk.

Helpful advice! To prevent the structure from swaying, it is better to cut slots not on opposite sides, but on adjacent walls of the bag.

The feeder can be made from two juice packets. The first tetra pack needs to be cut along the narrow side parts so that the top remains intact. 1/3 of the second bag is cut off, and a hole should be cut on the front side. This area will be used as a stern board. The bottom of the second tetra pack must be combined with the first bag. If everything is done correctly, you should end up with a triangle. To fix the parts, it is better to use glue, as well as wrapping with tape.

How to decorate a bird feeder with your own hands: interesting ideas

When the feeder is ready, you can start decorating it. In this case, everything depends solely on imagination. The design of homemade bird canteens is practically unlimited, the main thing is that all decorative elements are environmentally friendly and safe for birds.

How to decorate a feeder using scrap materials:

paint the structure with a coloring compound;
decorate with weaving from ropes or twine;
use materials of natural origin as decoration, for example, moss, tree bark and branches, cones, acorns, chestnuts;
decoration with colored ropes;
use of chains with unusually shaped links, etc.

On the Internet you can find many interesting ideas for decorating homemade feeders. If you approach this issue thoroughly, you can make a house of an unusual shape. After that, the paint remaining after the repair, various figures and colored paper are used for decoration. However, you should not overdo it with rustling and shiny parts, otherwise the birds will be scared. In addition, decorative elements should not create obstacles to feed collection.

The use of paint will not only change the color of the structure, but also protect the material from the negative influence of atmospheric factors. Coloring can be monochromatic or multi-colored. In this case, you can use various drawings. It is better if their theme is intertwined with winter motifs. You can find many interesting stencils on sale that will simplify the decorating process.

You can get an interesting design if you decorate a wooden structure in the form of a beehive or a miniature mill. This work is very meticulous, but if you try, you can achieve complete resemblance to real buildings. Decoration in the form of small branches will add natural charm to the design. You can hang a beautiful pine cone or an edible garland at the entrance, the main thing is that it does not block access to food.

Old dishes can be used for decoration, for example, a saucer with a cup or a teapot. To do this, 4 holes are drilled in the saucer and a rope is pulled through them. After this, the cup is glued to the saucer. This design can be hung in any corner of the yard. The design of the feeders looks original with carvings, bright paintings, pieces of leather and appliqués. By creating several designs in the same style, you can get a beautiful composition that will highlight the exterior of the yard.

By spending a little time building a bird feeder with your own hands, you can not only provide the feathered inhabitants of your garden with a tasty snack, but also get a worthy decoration for your yard.

We offer you a selection of different options for making a bird feeder with your own hands. Here we have collected the best master classes and step-by-step lessons, as well as dozens of original ideas and photos for inspiration. In this article you will find crafts of varying degrees of complexity: from those that will take no more than 5 minutes to create, to those that will require a lot of tinkering.

Creating feeders is one of the best ways to organize excellent leisure time and at the same time help feathered creatures survive the cold. This is a really useful and very kind thing - by hanging a feeder, you will prevent the birds from dying of hunger (in urban conditions, this, unfortunately, is quite possible).

What should you pay attention to?

We have previously told you about how to choose the right wood for creating birdhouses. If you are planning to make a wooden feeder, check out our tips. However, feeders can be made from other materials. Here are some general important tips before starting the creative process.

If you want to make your feeder colorful, paint only the outside to prevent birds from accidentally pecking and ingesting harmful chemicals.
When creating feeders, make sure that the hole into which the bird flies is smooth on all sides (this is especially true for bottle feeders, the edges of which can get scratched if not carefully cut). This will help protect birds from accidental injuries.
If you use glue or varnish in your work, carefully study their composition. They should not contain toxic elements.
Do not make paper feeders too large - if a bird sits on it, the craft may tear and harm the bird.
Remember that wooden feeders can develop dangerous mold, and metal feeders can develop rust. Therefore, it is better to protect them with a special coating (without harmful chemicals).
It is important to check the cleanliness of the feeder from time to time and examine it for damage.

Made of wood

Let's move on to the manufacturing process. A standard wooden feeder is made in the form of a birdhouse or house. They can also be made in several variations. We offer you the most popular of them.

House with vertical posts

Please use this dimensional drawing. The picture is clickable, and it contains step-by-step instructions for assembling the feeder with your own hands.

Please note that vertical posts can be replaced with thick branches.

The hut can be made of plywood, but it will need to be varnished.

Vary the size and height of the sides.

House with side walls

An approximate assembly diagram for this hut looks like this. Please note that dimensions can be changed and adjusted proportionally.

The side walls can be made solid. Interesting decor will add attractiveness to the house.

You can cut neat round holes in the side edges. Don't forget to sand them down so the birds don't pick up the splinter.

If the design turns out to be small, it is better to fill it with cereals and seeds, glued together into a special treat. More on this below.

Edible feeder

To feed the birds, you can do without a traditional feeder. Let's prepare special "cookies" for the birds and simply hang them on the branches.

We will need:

2 packs of gelatin;
2/3 glass of water;
2 cups of food (seeds, cereal);
skewers;
cookie cutters.

Pour hot water over the gelatin and wait for it to swell. Then mix it with cereal and seeds. Mix the mixture thoroughly and fill the cookie or muffin molds. Insert a skewer to make a hole.

When the mixture has cooled and “set”, carefully remove it from the mold and remove the skewer. Insert thread into the hole.

If you don't have molds, spread the gelatin mixture onto a toilet paper roll and roll it over the food to help it stick. Let it dry, then attach it to the branch.

You can also roll the mixture into lumps and place them in large mesh bags.

Birds really like this treat.

Bonus

Didn't find a suitable option? This video presents 50 more original ideas and a variety of ways to make a bird feeder from wood or bottles.

Choose any of the presented feeders, decorate it, fill it with seeds and cereals. This will give you a wonderful opportunity to observe the life of birds and do a good deed!

A feeder is not only a great way to feed our bird friends. If you approach the issue of making it creatively, you can create a real one. We offer a selection of ideas that will tell you how to make a bird feeder with your own hands. And master classes from the editors of HomeMyHome.ru will help you learn the intricacies of manufacturing and reveal the secrets of constructing drawings.

Depending on what goals you pursue when making a feeder, the following types of its design differ.

Tray. The simplest type of feeder. The elementary design involves a small pallet with sides, secured to a tree with a strong thread or fishing line;

Making such a “bowl” is not difficult, especially if you have a regular clothesline and clothesline on hand. One of the disadvantages is that in strong winds, such structures tip over, and all the food ends up on the ground.

Platforms with dispenser– an improved model of the previous type of feeder. It consists of a tray where the birds will feed, and a sealed container with a mechanism for gradually supplying food as it decreases. As a rule, the dispenser is made from an ordinary plastic bottle, attached to the tray with the hole down at a short distance so that the food pours out on its own. Of course, such feeders are more difficult to make, but the end result is a high-quality, convenient and durable design.

Houses − the most common feeders of all species diversity. In addition, if you approach the creation issue creatively, you can make a real shelter for birds and an original one for yourself.

Hopper feeders somewhat similar to birdhouses. They are completely enclosed structures with “windows” for birds. If you take some precautions, birds will even be able to hide in them from bad weather, and not just have a snack.

1 of 6

Inspired by ideas for creating simple feeders? If yes, then our small master classes are for you.

Related article:

How to make a birdhouse yourself, how to decorate it and install it correctly, photo examples of creative houses - read in our publication.

How to make feeders for street birds with your own hands - description and drawings

As we have already seen, feeders can be made from completely different materials - literally, everything that is at hand. It's a little more difficult to work with wood. But nothing is impossible, the main thing is that there is a desire. Let's look at different options for bird feeders.

Interesting DIY bird feeder made of wood

We offer step-by-step instructions on how to make a beautiful bird feeder house yourself, as in the photo below.

The main material is small logs, which can be cut from ordinary cuttings for or rakes. Fast, cheap and original. All other parts are also made of wood. To bring such a masterpiece to life, in addition to raw materials, you will need a special wood drilling machine and. It will be possible to do it without them, but it’s not a fact that it will turn out just as neatly and beautifully.

Illustration	Description
	We cut logs 30 cm long from the cuttings. You should get 36 pieces in total. 24 pieces - for the walls, and parts from the logs for the pediment. Remains are spare parts in case of damage to the main elements.
	We are preparing a machine with a wood crown of a suitable diameter to make recesses in the logs that will serve as fastenings for the future feeder.
	To ensure that the parts are similar and that the fastening recesses fit each other perfectly, it is best to make paired holes. To do this, we fasten the two blanks together with tape on both sides for better fixation and measure 3 cm from both ends.
	We make holes on the machine in the logs secured to each other at both ends.
	To assemble the house you will also need round wooden sticks. Sushi chopsticks are ideal, but not flat, but round. In accordance with their diameter, we make a hole in each recess of the log. And we begin to assemble the walls of the house.
	When you are finished with the construction, make sure that all the walls are even and glue the logs together.
	We cut out a template for the future roof from plywood. The size and slope depend on the design of the resulting house frame.
	Using the template, we cut the logs obliquely on both sides. We make a hole in the middle for the stick and glue the resulting structure. On the front side, if desired, we make a hole in the “attic”. Also, to give the structure rigidity, we put in a transverse beam and glue it.
	The roof can be made from any available sheet material. In our case, we used moisture-resistant plywood. Small parts were cut out to fit the resulting house.
	Let's start decorating the house - doors, canopy, attic. All this is done by hand from leftover plywood. In handicraft stores you can purchase various decorative items, such as a door lock. In our case, the door is simply glued to the wall.
	We make a pallet for the house from ordinary ones.
	It is best not to twist them together, but to glue them together, as shown in the photo.
	We paint the house, make sides on the pallet so that the food does not spill out, and you can hang the resulting food in the garden.

If you have any questions, you can find answers to them in the video provided.

DIY bird feeder made of plywood

To make a feeder out of plywood, you will need special tools to work with it, such as a jigsaw, wood glue, tape measure, pencil, construction angle and glue. Let's make a small hopper-type feeder, approximately as in the drawing below. They simplified it a little by placing only two walls, which will be held together to form a triangle shape.

All work takes place in several stages. Use a jigsaw to cut out the necessary parts. Their sizes and shapes are shown in the photo below.

We attach small blocks along the edges of the bottom so that their total height is approximately 5-7 cm.

Attention! We mount the blocks along the 27 cm long side so that there are small indentations along the edges - no more than 7 mm.

To the side where the indents are made, we mount the side walls. To make the entire structure stable, we reinforce it along the connection of the side parts with a block.

Treat the resulting feeder with impregnation so that the plywood does not deteriorate as long as possible under the influence of precipitation and temperature changes.

How to make a feeder out of a box - quickly and easily

A bird feeder made from a cardboard box is an option for those who want to do everything as quickly and simply as possible.

All that remains is to choose a stronger box, cut a hole in it for the birds, work out the mounting method - and the design is ready. It's a pity that it will lose its shape very quickly. But this is a fixable matter and costs practically nothing.

Master class on how to make a feeder from a plastic bottle

Plastic bottles are one of the most common recycled materials, suitable for making all sorts of useful things with your own hands. Feeders are also no exception. We offer step-by-step instructions for making a cute and durable feeder. For this you will need:

plastic bottles of 1.5 and 2 liters;
scissors;
lighter;
spray paints;
glue gun;
glue "Moment";
wire.

Illustration	Description
	We cut out the bottoms of three two-liter bottles. To make it look more interesting, you can cut out the edges with petals and burn them with a lighter, getting a wavy edge.
	We make a hole in the middle of the bottoms and string them on a wire.
	We cut off the top of a one and a half liter bottle and, like the bottoms, we process the edges with a lighter.
	We string the neck onto a wire and paint the resulting structure with paint.
	Use a swab to paint the edges with a contrasting color.
	We cut out the bottom part of a one and a half liter bottle, cut a hole and also singe it with a lighter.
	We connect the lower and upper parts with a glue gun.
	We cut out the weed from the remains of the bottles. And use a glue gun to attach them to the bottom.

The bird feeder is ready. We pour more food there and watch the growth of the bird population in your garden.

A bird feeder is a very simple invention that helps our feathered friends in difficult times. Both an adult and a child can make a feeder, because this activity does not require a lot of effort. Baby bird feeders aren't always perfect, but they're always a huge accomplishment for a child!

What to make a bird feeder from?

Most often they use the simplest and most easily accessible things, those that we have at hand, such as a box, plastic bottle, plywood, cardboard, coconut, bag, dishes or something else.

What to put in the birds' feeder? How to attract birds to your feeder?

Each type of bird eats its own type of food, the most common are millet, oats, wheat, sunflower seeds, lard, meat, dried rowan and hawthorn, maple and ash seeds. Try to have a variety of grains in your feeder.

What birds fly to the feeder?

More than a dozen different birds may visit your feeder. The most common species in the city are great tits, sparrows, rock pigeons and hooded crows. If you install a feeder on the outskirts of a city, or even in a village, the species composition will be more diverse - woodpeckers, bullfinches, pikas, jays, magpies.

How to make a bird feeder?

Let's look at several options, among which there will be one suitable for you!

Bottle bird feeder. Canister bird feeder.

Materials: plastic bottle, rope, scissors (knife), adhesive tape (duct tape), rod for the pole.

1) Using scissors or a knife, we make holes in a plastic bottle into which birds will fly.

2) We cover the cut areas with electrical tape or tape so that they are not sharp for the birds.

3) We make a hole in the bottle cap into which we insert a fastening rope.

4) A little below the cuts we make two holes for the pole to make it easier for the birds to get into the feeder.

Video. Make a feeder from a plastic bottle.

Bird feeder out of the box. Bird feeder from a bag.

Materials: a box of milk (can be any box), scissors (knife), rope.

1) Cut a hole for the birds.

2) Make two holes for the rope on which the feeder will hang.

3) Attach the rope.

Video. Bird feeder made from a milk box.

Gelatin bird feeder.

Materials: gelatin, various cereals.

1) Dissolve gelatin in a water bath (Put in a saucepan, which is lowered into another saucepan where the water is hot).

2) Pour in grain to form a thick mass.

3) Place in molds and wait until they dry.

4) Attach a rope so that you can hang it on a tree.

You can make a gelatin feeder in as many different shapes as your heart desires.

Bird feeder made of wood. Bird feeder made of plywood.

Materials: plywood(wooden boards), glue, nails, hooks.

1) Draw a sketch of the feeder on a piece of paper and transfer the markings to the plywood.

2) Cut out all parts of the feeder.

3) Use glue or nails to carefully connect all parts of the feeder.

4) Attach the hooks and open with varnish for a longer shelf life.

Video. Wooden bird feeder .

Bird feeder made of cardboard. Paper bird feeder.

Materials: box, cardboard, stationery knife, glue, stapler, tape, rope.

1) In the box we cut holes of the size we need.

2) To make a roof, you need to take a sheet of cardboard, larger than the top of the box, and fold it in half. Attach it with glue or a stapler or tape.

3) We decorate the feeder, here everyone can choose the color and design at their own discretion.

4) We attach a rope on which the feeder will hang.

Video. Bird feeder made of cardboard.

How to decorate a bird feeder?

You can decorate the feeder in a variety of ways, from simple painting with paints, to various types of additions in the form of balls, cones, ribbons, and molds.

In our article we showed you the simplest ways to make a feeder, but there are also many other options:

(17 ratings, average: 4,18 out of 5)

Making a bird feeder with your own hands is a fun and rewarding activity, especially if you have kids helping you. After all, surviving the winter cold is very difficult for our feathered friends. Sad statistics show that out of 10 birds, only 2 birds survive to see spring sunny days. And by placing an original bird feeder with your own hands in a public garden, park or on your own personal plot, you will save more than one bird’s life from hunger.

How to make a bird feeder with your own hands?

Arranging food station for birds in your garden or summer cottage, you kill two birds with one stone: you relieve birds from hunger in the winter and protect your harvest from numerous pests in the summer. Our feathered brothers are effective fighters against midges and other harmful insects. Birdies will delight you with cheerful chirping, loud trills or funny games and fuss around food, and all this is fascinating to watch.

By showing a little imagination and making an original bird feeder with your own hands from scrap materials, you will decorate your garden with an extraordinary accessory! So what do you need to have on hand to make your own bird feeder? Materials that can be used are empty cans, wine bottle caps, plastic cans and bottles, cuttings of branches, unnecessary pieces of plywood, roofing felt and boards, unused dishes (cups and saucers, mugs, teapots, decorative glass bottles), metal or nylon mesh and other household rubbish. For fastening and decoration, rope, fishing line, various chains, ribbons and nylon tapes, and wire will do.

Despite the variety of materials, all designs can be conditionally divided into four groups:

Sturdy and durable birdhouse-like feeders made of wood.
“Disposable” feeders made from cardboard boxes do not require any costs, but they will not last long.
Easy to manufacture, designs made from plastic cans, cans or bottles.
Feed suspended on threads.

What to use for feeding?

Experiencing a significant lack of food in the cold months, pichugas will eat everything you offer them with great pleasure. For complementary feeding, use any ground cereals: buckwheat, rice, oats, millet and millet - everything will be eaten. Grind any nuts and grains; add a little honey to the seeds of pumpkin, melon, watermelon, quinoa, thistle, hemp, sunflower, and quinoa.

At the titmouse feeder add small pieces of lard or chicken, boiled and finely chopped egg. Any dry berries and fruits will not be left without attention, especially viburnum and rowan bunches.

When setting up a dining room for birds, you must not forget to regularly fill the feeder with a nutrient mixture, since birds, getting used to feeding in one place, are ready to fly quite a long distance for food. And not finding food in the usual place, tired and hungry, they may die. Do not use rye bread, roasted nuts, cereals, grains and seeds, salty foods, citrus fruits, or fresh rolls for bait. Such products will harm birds.

When selecting material for making a feeder, you need consider a few points:

How to make a bird feeder accessible and safe?

Feeders need to be placed in open, easily visible areas, that is, in places accessible to birds. Bird feeding areas should not be provided in dense branches, highly windy areas, or in areas where cats can reach. Bird feeders, mounted on a tree trunk or branch, or on the walls of outbuildings at a height of about one and a half meters, are easily accessible to birds, it is convenient to add food to them and they are inaccessible to domestic predators.

Most of us think of a bird feeder as a small house or birdhouse. This form is an ideal solution for organizing poultry catering.

Whatever material you choose, the design must include:

Lightweight bird feeders made of plastic or cardboard can be easily weighed down by placing a piece of unnecessary linoleum or plywood on the bottom.

The most original bird feeders are grain ones

To make it you will need a mixture of raw grains, seeds, nuts and bread crumbs. We will make the base of the feeder with our own hands from thick cardboard and nylon thread, using scissors and a thick needle. Adhesive backing made from oatmeal, mixed with egg and honey, or from gelatin. Mix 2 tablespoons of oatmeal (not cereal), 1 egg and 1 teaspoon of honey, leave for 30-40 minutes. At this time, we cut out the base for the feeder from cardboard in the form of hearts, stars, and any other geometric shapes.

To attach the delicious treat to the branches, use a thick needle to thread a thread, lace, braid or ribbon through a hole in the cardboard blank. Apply the swollen adhesive mass to the base and roll it in the prepared grain mixture. Place in the refrigerator to harden and after a few hours the treat for the birds is ready!

With a gelatin base, the manufacturing process is even simpler. Mix the finished nutrient mixture with a warm gelatin solution and pour into silicone baking molds. Having inserted a loop for fastening on the branches, we send it to harden in the refrigerator.

An original solution for such feeding would be old dishes. We leave the food prepared in any way to harden in mugs or a teapot that has become unusable. We tie the fastening thread to the handle of the product. We hang treats on the trees and watch the birds feast.

Cardboard box feeder

How to make a feeder with your own hands from a candy box or parcel, milk or juice. Having placed the edges of three candy boxes inside each other in the form of a triangle, we glue or use tape, thread any lace or ribbon through the roof and fasten it to the tree. The feeder is ready. Designs made from bags of any drinks will last a little longer, since they have a laminated layer inside and outside, moisture-proof. Using a knife or scissors, cut out an entrance, a round or square hole in one of the sides, slightly above the bottom of the box. A rope is attached to the top for hanging on a tree. The feeder is ready in a few minutes.

Similarly, you can make a feeder with your own hands from plastic containers: bottles, canisters, cans.

It is easier to secure a plastic feeder with wire. And to protect the birds from injury, seal the entrance hole with tape or tape. With a little more time, you can make a basic bunker feeder from plastic bottles. To do this, two through holes are made in a one and a half or two liter bottle: the first at a height of 10-15 cm from the bottom and the second in the center of the container, perpendicular to the first. Two wooden spoons are inserted into these holes. Holes on the wide side of the spoons expand to release feed. It is convenient to pour food into the feeder through the neck of the bottle; under the weight of the grain mixture, the plastic feeder is not afraid of gusts of wind, the food remains dry and accessible to the birds for a long time.

Having insulated a one and a half or two liter container from the inside with yarn or sisal, you will know how to make a birdhouse from a bottle.

A little more time and skill will be required to make a bird feeder from plywood.

It can be with a gable or flat roof, open or with a bunker compartment. To make even the simplest feeder, like a birdhouse, you will need a drawing that can be found on the Internet or calculate the design yourself. Tools needed: hammer, jigsaw, nails, glue, sandpaper. In addition to plywood, you will need a block.

Procedure

The plywood feeder is hung by a rope threaded under the roof or a hook screwed into the roof. The service life of such a structure will be extended if it is coat with varnish or oil paint.

Classic dining room made of wood

However, with a little imagination and ingenuity, you can create a real masterpiece!

The minimum tools you will need are: a hammer and nails, self-tapping screws and a screwdriver. Cutting boards can be combined with slabs or branches, preserving the tree bark; small twigs or straw will decorate the plywood roof of the feeder in an original way. The roof of a wooden feeder can be mounted either on four support posts or on two flat supports located opposite each other. In addition, a feeder with two supports can be two-level or bunker. And, having certain skills and appropriate equipment, the sides of the birdhouse dining room can be made of any shape.

Making a double-walled feeder does not require an exact drawing of the bird feeder and adherence to exact dimensions. But there is unlimited scope for creative thought.

The assembly of the structure occurs in the same sequence as the plywood feeder. The bottom is fastened to the supports, then the sides and the roof. Since the bird feeder made of wood is quite heavy and durable, it can be installed either on a support pole or by hanging it from a wire or rope on tree branches.

For the convenience of small birds, titmice and sparrows, thin branches-perches can be attached parallel to the sides. And by cutting out round “windows” in the walls and threading a knitting needle or metal pin through them, it becomes possible to diversify the birds’ table with apples, pieces of pumpkin or lard.

The ideal solution for “remote” food points, especially near birdhouses, is dispenser installed inside a double-walled structure. One of the bunker options is with glass or plastic sides. On the inside of the walls, vertical grooves are cut, not reaching the bottom by about a centimeter, into which side panels made of glass or plastic are inserted. The food will spill out through the gap as the birds eat it.

A feeder that is easier to make, in which a plastic bottle serves as a hopper. Cut off at both ends, it is hung with wire in the center of the feeder a couple of centimeters above the bottom. To make it easier to fill the hopper with nutrient mixture, the lid of the feeder is removable.

Without the opportunity to frequently replenish provisions in the feeder, a filled bunker will well preserve bird treats and allow the birds to remain full for a long time.

By placing a birdhouse made with your own hands from scrap materials next to the dining room, you will provide for tits and other small birds both housing and food.

Whatever idea you choose for making a feeder with your own hands, the birds will certainly thank you! Having tried your hand at making a feeder, you can also make a birdhouse with your own hands from scrap materials.

Bird feeders