home building materials

Chipboard dimensions. Laminated chipboard, sheet dimensions and price, thickness

Laminated chipboard (laminated chipboard) is one of the most popular materials for furniture production. Leading chipboard manufacturers recognize each their own standard sizes laminated chipboard sheets, let's try to understand this grid, because right choice The size of the chipboard leads to a reduction in the number of residues and scraps, which means production optimization and cost reduction.
"Egger"
The specialists of this company came to the conclusion that the optimal dimensions of a chipboard sheet for furniture are 2800x2070mm, but at the same time, the company focuses the consumer's attention on a large selection of sheet thicknesses. In addition to the standard 10,16,18,25mm for all manufacturers, a 19mm thick sheet is also offered, which opens up more opportunities for some furniture manufacturers.
"Swisspan"
The chipboard size grid of this company is much more rigid and looks like this:
- 2440x1830x25 mm
2440x1830x22 mm
2440x1830x18 mm
2440x1830x16 mm
2750x1830x16 mm
2750x1830x18 mm
2750x1830x10 mm
Plates of this brand are in constant demand among furniture manufacturers, and the standard size allows you to optimally calculate production costs.
Kronospan Russia
The variety of sheet sizes of this brand is limited to two sizes and different thickness: 1830x2070mm and 2800x2620. In this case, the sheet thickness can be: from 8 mm to 28 mm, including the most popular thicknesses (10, 12, 16, 18, 22, 25 mm).
It should be noted that all sizes of chipboard 10 mm thick are in demand, because. such sheets are traditionally used in the manufacture of those elements of furniture that do not carry an increased load, but rather perform decorative functions (doors, facades), and therefore do not require special strength.
The above list of sizes is of course not exhaustive, but nevertheless these are the main sizes manufactured by domestic and foreign manufacturers of laminated chipboard at the present time, and based on them, the manufacturer can find the best solution for his production, which means that the end user will be able to get high quality for a lower price.

Like chipboard. Consider laminated chipboard, sheet dimensions and price, thicknesses and possible aspects of application.

Why is the material in high demand? The scope of laminated chipboard is the widest - interior decoration walls, furniture production, interior renovations, etc.

Chipboard has a lot of advantages:

moisture resistance;
budget price;
Beautiful design;
strength and durability;
resistance to temperature changes;
a wide choice of colors.

Dimensions of laminated chipboard sheet

With some stretch, we can say that there is a standard size for laminated chipboard sheets.

However, this statement is debatable. The fact is that each manufacturer, for the convenience of consumers, operates with its own chipboard sheet sizes. Let's show this with an example.

Take the company's products swisspan. The dimensions of her products will be as follows.

2440x1830 with a thickness of 25 mm.
2440x1830 - 22.
2440x1830 - 18.
2440x1830 - 16.
2750x1830 - 16.
2750x1830 - 18.
2750x1830 - 10.

Company Kronospan Russia two sizes of laminated chipboard - the standard length can be 2800 or 2620, and the width - 1830-2070 mm. As for the thicknesses, their ruler is as follows: 8, 10, or 12 and 16, 18, as well as 22, 25 or 28 mm.

Firm Egger acted even simpler - the size of its laminated sheet is also standard and equal to 2800x2070 mm. Thicknesses are 10, 16, 18, 19, 25 mm.

Why is there such a variation in thickness? It all depends on the destination. It is clear that where special strength is required, a thicker plate is used. For finishing or ceiling work - less.

Now about the main thing - about the price of the sheet. This is perhaps the main advantage of chipboard.

The price of laminated chipboard sheet

Unfortunately, everyone knows how much a tree costs today. Its price is exorbitant. This is where chipboard comes to the fore. The design of the plate is very similar, and the cost is much less.

For example, the price of a sheet of Egger laminated chipboard with a thickness of 10 mm today is $30, $25 - $41.6.

Chipboard Swisspan size 2440x1830x16 costs about $20.

Naturally, retail prices in each region are different. But, as we see, it is even incorrect to equate material with wood.

Egor11

furniture industry in Lately Increasingly, instead of the usual wood, another material is used - chipboard (chipboard), which has several varieties and is characterized by good performance.

The use of chipboard is not limited to the production of furniture, it has become widespread as a relatively light and cheap material for universal use. What are types of chipboard, standard sizes and areas of its use - this is our article.

Technology chipboard production quite simple: with the help of a special adhesive, natural wood chips are tightly connected to each other. As the main “ingredient”, low-value coniferous wood waste is used, so such production is quite justified from an environmental point of view.

What furniture is better from chipboard or MDF, you can find out in this

Often such designs are limited in width to two thin sheets of laminated film. The thickness of the formed layer of the plate can be 8 - 38 mm. The most popular are chipboard with a width of 16-18 mm.

Advantages of DPS:

Ease of processing.
Low cost.
Light weight.
Good strength.
Structural uniformity.
Large selection of chipboard colors.

All these indicators make the plates very popular in various fields of construction.

Disadvantages of such plates are also present. They mainly concern the quality of the binders used. If the excess of formaldehyde resins is greater than the average, the use of such materials in residential premises is highly doubtful. To avoid harmful effects on the body, the boards should be chosen exactly according to the safety class, without using chipboard of unsuitable parameters.

The following types of chipboard are classified according to the type of surface:

Recently, wood-based panels lined with special plastic coatings and polymer films have also appeared. This allows you to increase the moisture resistance of the material, but from a practical point of view, such plates are very fragile. The quality of such chipboard will vary greatly depending on the manufacturer, so before buying it is advisable to check all hygiene certificates that allow the material to be used indoors.

What it looks like is indicated in the article.

Slab dimensions

The production and dimensions of finished chipboards are regulated by the state standard, so the dimensions of quality products will meet the following criteria.

What exist can be found by reading the article.

Main dimensions of chipboard boards:

Thickness from 8 to 38 mm.
Width from 800 to 2070 mm.
Length from 1200 to 5680 mm.

The given dimensions may vary depending on the manufacturer and destination. The thicker the plate, the larger the dimensions it can withstand, but for domestic needs, chipboard thicker than 16 mm, the length of which exceeds three meters, is rarely taken. How much does it weigh? The weight of one sheet ranges from 40 to 70 kg, depending on the dimensions.

Estimated cost of chipboard boards

Several factors will affect the price of the material at once. First of all, it is the view dimensions Chipboard. The degree of moisture resistance and the presence of a laminated edge also form the cost, as well as the type of raw materials used in the production. For the convenience of calculations, manufacturers offer two price list formats: the price per square meter and a whole sheet of chipboard.

Estimated cost different types(size chipboard sheet 16 mm)

Item No.:	Type of chipboard:	Dimensions, mm:		Cost, $:
Item No.:	Type of chipboard:	Width	Length	Per meter²	Per sheet:
1.	Polished slab I grade:	1750	3500	2,6 – 3,1.	12,1 – 14,1.
2.		1830	2440	1,9 – 2,2.	8,6 – 10,7.
3.		1830	2750	1,6 – 2,7.	9,0 – 12,0.
4.		1830	3060	2,5 – 3,0.	11,1 – 13,9.
5.		1850	2500	2,2 – 2,3.	10,0 – 10,7.
6.		2070	2800	1,8 – 2,4.	10,8 – 13,3.
7.	Laminated chipboard:	1830	2440	2,9 – 3,3.	12,9 – 14,7.
8.		1830	2750	3,9 – 4,15.	20,4 – 21,6.
9.		2070	2800	4,3 – 4,7.	26,9 – 27,5.

As you can see, the cost of chipboard of various configurations is an order of magnitude lower than the prices for similar fiberboards, and even more so natural wood. It is this factor that makes chipboard the most popular option for replacing wood for finishing work.

Chipboard - a great option for an environmentally friendly analogue of wood. There are a lot of varieties of chipboard to choose the right brand for any kind of rough finishing work, furniture manufacturing and other domestic and industrial needs.

Plates are produced in a sufficient range of shapes and colors, the most popular is a thickness of 16 mm, which allows you to make furniture of good strength and high performance. When choosing chipboard for interior work, you should definitely pay attention to the marking and composition of the material.

Laminated chipboard today is one of the best materials for the manufacture of cabinet furniture. Kitchens, hallways, sliding wardrobes, office tables and school desks and much more are made from laminated chipboard. Leading chipboard manufacturers produce rectangular sheets of various sizes. This allows furniture manufacturers to rationally use the material, reduce the number of scraps.

Order cutting chipboard

Chipboard sizes can be different, it all depends on the manufacturer's equipment. There is no general strict standard for chipboard sizes. We note the most common and popular dimensions of sheets:

2440 mm by 1830 mm
2500 mm by 1830 mm
2620 mm by 1830 mm
2800 mm to 2070 mm

Sheet thickness can vary from 8 to 28 mm. Thicker sheets are less common because they are not used often. More common Chipboard 10 mm, Chipboard 16 mm, Chipboard 18 mm, Chipboard 25 mm.

Are in great demand sheets of laminated chipboard 16 and 18 mm. They are used for the manufacture of cabinet furniture. Sheets with a large thickness are used for the production of countertops and other parts of furniture where there are large mechanical stresses. The thinnest laminated chipboards 8 mm and 10 mm are used in facades.

Manufacturer	Sheet dimensions, mm	Sheet thickness, mm
	2070x2800	10, 16, 18, 19, 25
	2070x2800, 1830x2750, 1830x3660	10, 16, 18, 26
	1830x2620, 2070x2800	8, 10, 12, 16, 18, 22, 25, 28
	1850x2500, 2070x2800	10, 16, 22
	1830x2750	10, 16
	1830x2750	from 10 to 38
	1830x2440	8, 10, 16, 22
	1830x2750	10, 16, 22

The painted dimensions of chipboard are standard for many Russian and foreign manufacturers. We always have all sizes in stock, which will allow you to use the material in the most optimal way in the production of furniture.

Chipboard EGGER have the following characteristics:

For detailed information on prices, see the page.

Material types

LDPE can be classified according to several criteria. These can be dimensions, manufacturer, etc. One of them is a qualitative characteristic. The material can be divided into 3 types:

The first grade is considered the best, since it is made of one type of wood (for example, Wenge chipboard), has a flat surface without chips. It is made from selected sawdust. On each side, the sheet is laminated with a film or a layer of veneer is applied;
The second grade is medium, may have minor defects. It happens both with lining and without it;
The third grade is used only for construction purposes, has large surface defects and does not need cladding.

The lining of the material can also be varied. According to this principle, chipboard is also classified. Exist:

Veneered sheets are finished with a thin layer of material. Such plates are considered the best;
Also laminated or trimmed with special paper;
Draft sheets without facing.

The material is divided by dimensions. The fundamental measure is the thickness, which starts from 8 millimeters and ends at 38 mm. The average size is 16 mm chipboard and 18 mm chipboard.

Chipboard has several quality characteristics.

, thanks to a special impregnation with paraffin and the presence of wood fibers with moisture-resistant impregnation. Such processing resists moisture and swelling of the material.
In addition to moisture resistance, chipboard can be fire resistant if it contains fire retardants.
This material is extremely easy to install. The size of the sheet allows you to adjust the dimensions of the plate to the required measurements. It is enough to cut the sheets according to the necessary measurements and put them into production.
The plates have a wide range of colors, which allows them to be used in various design styles.
The material is considered one of the most economical, because it has a relatively low price.
Wooden slabs are durable and dry out over time.

Thanks to such a wide classification of materials, choosing the right option is easy. A wide range of colors and quality characteristics makes this material relevant in different regions. For example, you can buy 18 mm chipboard in Moscow at any hardware store.

Such characteristics make laminated chipboard one of the most popular materials in construction and it is very simple to buy plates of various types in Moscow.