home building materials

Decorative panels for the exterior of the house. Facade panels under the stone - imitation is not worse than the original

Almost every owner of a private house sooner or later needs to finish the facade. Exterior cladding gives the house an aesthetic appearance, and, importantly, protects it from the negative effects of the external environment. In addition, it creates additional heat and sound insulation, and also extends the operational life of the building.

Today, thanks to the latest technologies, you can choose the latest and most modern facing materials, which include facade panels, which are widely popular due to their excellent characteristics and rich selection.

Panel types

In order to determine the choice of the optimal option for facing external walls, you should know what a particular facade system is.

The basis of such sheathing material is aluminum or galvanized steel, the front side of which is protected by a polymer coating.

Facing material is presented in several versions:

corrugated;
perforated;
smooth;
with additional decorative ribs.

Advantages of metal products:

affordable cost;
high degree of fire safety;
low expansion coefficient;
withstands high mechanical loads;
water resistance (if the installation technology is observed);
high degree of noise reduction;
resistance to acidic and alkaline environments;
stability to temperature fluctuations.

The disadvantages include: low thermal insulation ability of the metal.

Installation of metal cassettes is carried out in the direction from the bottom up. Before starting the installation, it is necessary to remove the protective film, and the protective coating on the front side is removed only after the installation of the panels is completed. In general, the installation technology of this facing product is carried out similarly to the technology of fastening panels from another material.

This type of material for wall decoration is considered the most environmentally friendly. Their basis is wood, the separated fibers of which are glued together under pressure, covered with a composition that protects against negative impact. A three-dimensional pattern is applied over the protective layer, repeating the surface of the tree.

The undeniable advantages of the material for cladding are:

wood imitation;
light weight;
durability;
excellent resistance to low temperatures;
does not give in to cracking and deformation;
provides heat and sound insulation;
ensures the conservation of energy resources;
has a high ability to withstand bending;
ease of installation (processing, drilling, sawing).

Flaws:

high degree of fire hazard;
high level of moisture absorption, as a result of which the product swells.

This type of cladding material is distinguished by a multilayer structure: between sheets of galvanized steel and an alloy of aluminum, manganese and magnesium, there is a heater and a vapor barrier. The steel surface is coated with a corrosion-resistant coating. The front side of the plates has a smooth or profiled surface that imitates a variety of natural materials.

Aluminum foil acts as a vapor barrier, and polyurethane foam, basalt or mineral wool, fiberglass, polystyrene foam serve as a heater.

Benefits of using sandwich boards:

environmental Safety;
light weight (up to 4 kg);
good soundproof qualities;
laying can be done in any weather at any time of the year;
resistance to changes in temperature and humidity;
unaltered appearance for a long time;
resistance to the occurrence of fungus;
low price.

Flaws:

low resistance to mechanical damage;
the occurrence of thermal bridges at the junctions.

Sandwich panels are laid on self-tapping screws, and dowels are driven into the concrete base. The connection is carried out using the tongue-and-groove method, which guarantees high-quality protection of the walls from moisture penetration.

For auxiliary protection, the joints are treated with various sealing mastics, a polyurethane-based conveyor belt. The edge seams are filled with mineral wool or mounting foam and then closed with special strips.

This type of sheathing is divided into:

Vinyl. They are made from PVC polymers, special stabilizers and dyes. The front side of the product can be embossed or smooth. The advantages of such panels include: long service life, low fire hazard, water resistance, UV resistance, act as additional thermal insulation, easy to cut and install. Disadvantages: poor resistance to low temperatures, as a result of which the product begins to crack and split. Installation of vinyl panels is carried out with an overlap, in the direction from the bottom up, in horizontal rows. The joining of the plates is carried out by means of special snap fasteners in the perforated edges. The coating is attached to the base with aluminum nails or self-tapping screws.
Polymeric with mineral filler. The material consists of micromarble reinforced with fiberglass and polymer concrete. Forming is carried out by hot compression under high pressure. Products have a number of positive qualities: impact resistance, moisture resistance, frost resistance, belong to a high class of fire safety, durability. Disadvantages: when melted, the material releases harmful substances. Installation of plates is carried out similarly to the installation technology of vinyl panels.
Made from expanded polyurethane. Plates are made of infusible plastic, have a cellular structure. The front side is made of facade clinker tiles. Sheathing advantages: service life of more than 40 years, frost resistance, low thermal conductivity, high degree of fire safety, moisture resistance, ease of maintenance, operating temperature is -50 - +100 degrees Celsius, light weight. The slabs are laid vertically using the tongue-and-groove method. The coating is fixed to the frame through holes in a special ledge using stainless countersunk screws.

There are several types of siding depending on the material of manufacture: vinyl, metal, wood, cement and polystyrene foam. The coating can be monochrome, color, with a pattern or imitating natural materials.

Quite simple, each element is equipped with a latch that securely connects the plates to each other, forming a sealed seam. To fix the cladding, it is necessary to make a crate, under which a heat insulator and a vapor barrier film are laid.

Benefits of using siding:

affordable cost;
ease of installation;
It does not require special care;
resistance to UV rays;
retains its original appearance for a long time;
resistance to corrosion and decay due to treatment with special compounds;
long service life (more than 45 years);
fire resistance;
light weight.

The disadvantages include:

plastic siding should be fixed only in the warm season;
wood siding requires fire retardant treatment;
Under the influence of temperatures, the vinyl coating expands and contracts, as a result of which it makes an unpleasant noise.

Fiber cement coating for finishing the facade of a house is made of high-quality concrete grades with the addition of a synthetic component - fiber. The products have a hydrophilic inorganic film, due to which a self-cleaning coating is obtained.

The coating is used in the repair of external walls, as well as for cladding and insulation of facades. The surface of the front side of the slabs has a varied pattern, giving the facade the appearance of finishing with stone, brick, wood and other natural materials.

Installation is carried out on a metal or wooden crate using clamps, nails, rivets and self-tapping screws.

Advantages of fiber cement boards:

long service life (more than 15 years);
frost resistance;
resistance to corrosion and decay;
resistance to UV rays;
fire resistance;
environmental Safety;
resistance to deformation;
retain their working qualities in the process of exposure to low and high temperatures;
serves as an excellent heat insulator;
high degree of sound absorption.

Flaws:

require painting after installation;
high degree of moisture absorption;
low impact resistance.

Brick-like slabs for facade cladding are a facing material of two layers, its upper layer consists of a concrete base with a three-dimensional pattern, repeating the appearance of a brick, and the lower layer is thermal insulation, which is foam plastic.

Sheathing is used as decorative material for facing external walls of the house and thermal insulation of walls. Brick-like slabs are suitable for mounting on concrete, wood and brick substrates.

Installation of the facing material is carried out on a metal profile crate, rarely on a wooden frame. This is due to the fact that the wood is prone to decay. The frame is attached to the base with dowels.

Positive qualities of plates:

light weight;
resistance to the effects of atmospheric phenomena;
moisture resistance;
serves as an excellent heat and sound insulator;
easy to mount;
affordable price.

Minuses:

susceptibility to mechanical damage;
high degree of ignition.

Decorative panels are made of plastic High Quality with acrylic coating. The composition of the material includes polyester resin, fiberglass and natural stone powder. The plates are equipped with protrusions, thanks to which a seamless connection is ensured.

Fastening is carried out with screws and nails, the design of corners is carried out using additional corner elements.

Advantages of stone coating:

has excellent heat and sound insulation qualities;
low degree of thermal conductivity;
over a long period of use does not lose its original appearance;
resistance to atmospheric phenomena and mechanical loads;
fire resistance;
durability.

The disadvantages include: the possibility of melting processes in direct contact with the flame.

Clinker slabs are a multilayer structure, the front side consists of ceramic tiles, bottom - insulation, which is polyurethane foam or polystyrene foam.

Installation of the coating is carried out directly on the walls using dowels or self-tapping screws.

The advantages of such a facing coating:

environmental friendliness;
strength;
water resistance;
simple installation technology;
the possibility of repairing individual sections by replacing damaged plates;
resistance to external conditions;
do not require care;
long service life (more than 40 years);
variety of colors and textures;
serves as excellent thermal insulation.

There are practically no disadvantages, but it should be noted:

fragility of the front layer;
high cost.

Most often, granite, marble, gabbro, limestone, shell rock are used for facade decoration. Laying stone requires preliminary surface preparation: plastering and fixing the paint grid. On top of the stuffed mesh, stone slabs are attached to the adhesive composition.

The technology of laying stone with even edges is similar to laying ceramic tiles, with the exception of glue. For these purposes, the composition for outdoor work is used.

Laying is carried out from the bottom up. If the stone is uneven in shape, it is necessary to select the plates in such a way as to minimize the size of the joints.

Benefits of natural stone:

strength;
durability;
weather resistance;
environmental Safety;
does not require constant care.

Flaws:

complex installation technology;
high price;
great weight.

Insulated plates consist of several layers:

insulation (polystyrene foam, penoizol);
adhesive reinforcing composition;
primer mixture;
decorative facing tiles.

There are several types of insulated plates:

Thermal panels.
Front thermal plates;
Insulated plastic plates.

Installation of plates can be carried out on the crate, in the presence of large irregularities in the base, and directly on the walls. The facing material is fixed from the corner of the house in the direction from the bottom up, while the corner components are fixed first.

Advantages:

serves as excellent thermal insulation;
impact resistance environment;
It does not require special care;
fungal resistance.

Flaws: during long-term use change shape.

Panel selection

When choosing a finishing material, some factors that play an important role should be taken into account. First of all, it is necessary to assess the condition of the base, and only then determine what parameters the wall slabs should meet. Be sure to take into account the degree of fire safety and environmental friendliness of the material, as well as the number of layers and its cost.

Fire safety and environmental friendliness

Plates must have a high degree of fire resistance in order to protect the walls of the house from flames and high temperatures.

It is necessary to choose only environmentally friendly material. When buying, be sure to check the certificates of product quality, it is better to give preference to well-known manufacturing companies.

View and Layers

There are several types of cladding:

single layer;
composite (up to three layers).

Single layer panels act as decorative finishes house walls. Multilayer boards have strength and high thermal insulation properties, they allow you to solve the problem overnight. Due to this, the walls do not require additional thermal insulation.

Price

The cost of coating depends on the type, texture and color scheme. A coating made of natural material will cost much more than artificial, while artificial will not be inferior in quality to the first.

Estimated cost of slabs for exterior cladding of the house:

PVC imitating stone from 350-600 rubles / piece.
Brick panel - from 520 rubles / pc.
Thermal panels from 550-1250 rubles / m2.
Sandstone from 500 rubles / m2.
Clinker brick - from 1000 rubles / m2.
Siding - from 175 rubles / piece.
Sandwich panels - from 950 rubles / m2.
Metal - from 350 rubles / m2.
Natural stone - from 500 rubles / m2.

Exterior decoration of the house is recommended to be carried out after its shrinkage, otherwise the movements can lead to the destruction of the cladding. Exterior decoration can be performed no earlier than a year after the construction of the house.
Pre-installation of facade panels walls should be waterproofed.

Owners of private houses during renovation or after completion of the main construction works often face problems at home. The modern construction market provides a wide selection of various finishing materials specifically for facade work. In order to somewhat orient the consumer, let's consider one of the most popular options - finishing the facade of a private house with the help of facade panels.

Finishing the house with facade panels

First of all, it should be noted that facade panels for exterior decoration are distinguished by the material from which they are made, and, consequently, by the cost and method of their installation. As a starting material, metal (aluminum, galvanized steel, copper), wood fibers, fine-grained chips of one or another stone, porcelain stoneware, cement-fiber materials - fiber cement, various polymers, glass can be used.

They also vary in size - from small typesetting panels to profile sheets or long narrow panels. But they all have a lot of positive properties - resistance to adverse effects. external factors, including temperature fluctuations, environmental pollution, high humidity; increased thermal and sound insulating properties; fire resistance; ease of installation; after all, a rather attractive appearance - the panels can imitate with a high degree of accuracy a variety of surfaces made of natural materials (stone, wood, brick).

Additionally, it should be said that such facade panels can be successfully used not only for facade cladding, but also for finishing the basement. Let us consider in more detail the most popular types of facade panels.

Facade panels for exterior decoration

The most common and budget option for building sheathing is the use of plastic facade panels for the exterior of the house. They are made from polyvinyl chloride with the addition of various additional ingredients in the form of stabilizers, modifiers and dyes, the presence of which in one ratio or another regulates the performance properties of the final product - a plastic panel. In the market of finishing materials plastic panels for finishing facades are presented not only in the widest color scheme, but also with a surface of different texture (smooth or embossed, imitating the surface of a wooden board). But it should be noted that with a significant decrease in temperature, such panels become brittle.

No less popular, especially among owners of old and somewhat dilapidated houses, is decorating the house outside with brick-like facade panels. Such panels are presented in the widest range and they differ in the composition of the source material, in the method of fastening and, accordingly, in price. So, what does the market of finishing materials offer in this regard. First of all, these are panels made of clinker tiles with imitation brickwork. A fairly plausible imitation of artisanal molded bricks is provided by concrete-based panels made by vibrocasting. Brick-like panels are also made of fiber cement, polymeric materials, and plastic. You can find brick-like facade panels for exterior decoration of buildings, made of metal.

AT recent times The decoration of houses outside with facade panels under the stone is gaining more and more popularity. They are made in two variations - plastic and polymer. The second type of panels, due to its improved performance and more plausible imitation of the surface of natural stone (stone powder is introduced into the composition during production), is currently more in demand.

Giving your beloved home an attractive or even unusual look is the dream of any homeowner. But not everyone knows how to do it.

Do not think that it is so difficult, because in order to transform your home into something amazing, you just need to choose the right building materials used.

The result of finishing the house with cladding panels

The easiest and most popular way is facade cladding panels.

Decorative finishing function of the panels

To decorate your home as best as possible, you can use various types of materials. Some still prefer to buy natural wood to create a decorative design for the interior and exterior of the room, but this type of finish is short-lived, unlike polymer panels.

For example, facade cladding panels made of various polymeric and natural materials can last for decades without losing their beauty throughout the entire service life. This small nuance makes them cost-effective from almost any point of view.

Excellent stone wall finish

Facade panels can be various types and made from various materials. Most often you can find metal and plastic panels with a polymer coating. These types are highly popular due to their excellent protective characteristics and resistance to various factors.

Protective properties of panels

Facing with facade panels is not only an improvement in the appearance of the house, but also its protection. Panels with additional layers can not only decorate the facade of the building, but also protect it from cold, moisture, ultraviolet rays, and gusts of wind.

Almost all types of cladding panels are durable and have a variety of protective coatings that allow them to serve without the need for replacement and repair.

The materials used for facade decoration are protected from moisture, corrosion, aggressive chemical environments, deformation from physical shocks, biological factors (rodents, insects and other pests).

There are insulated finishing panels

When using additional layers, the facade will provide insulation and sound insulation.

The use of cladding panels

Facing building materials are widely used for supermarket decoration, shopping centers, exhibition halls, department stores, shops, business centers, entertainment complexes.

Here you can see photos of facade cladding panels that were used to decorate country houses, summer cottages and other buildings.

From this we can conclude that facade panels can be used to protect and decorate buildings of various purposes.

Types of cladding panels for the facade

When finishing a building, you can use one of several types of facade cladding panels:

single layer panels represented by a rather thin design that performs an exclusively decorative function;
two-layer- in addition to a layer with a texture or pattern, there will also be a layer of thermal insulation;
three-layer structures consisting of two outer and one inner layer.

The latter is the most expensive type. He has maximum level protection, although it weighs a lot.

In addition, the panels can be divided into two more groups:

composite;
whole.

Compounds cost a little less and can be used to create your own texture or pattern.

Solid panels have a finished decorative layer. They come in quite large sizes, so they require special fasteners, but despite this, they will take much less time to install than to collect small composite parts.

Panel materials

Cladding panels are made from different materials. Depending on this, they various properties and are of the following types:

Ceramic panels. One of the most popular types of facade panels. They are heavy, but their service life exceeds 50 years. In addition, these panels are frost-resistant, they are not afraid of heat, sun and moisture.
Polypropylene facade panels have gained no less popularity. Only now their fragility does not allow them to be used without materials that can improve rigidity. general design. They have almost the same properties as ceramics, but are slightly cheaper.
Expensive fiberglass panels. Their original decor can suit almost anyone's taste. Provides excellent protective properties long-term operation panels, but they could not gain wide popularity due to the rather high price.
Sandwich panels are probably the simplest among all types in terms of decor. They cannot be called particularly attractive, but their protective properties and high sound insulation may appeal to those who love silence and comfort. Although sandwich panels are a rather bulky and heavy structure, they are mounted without any problems.
Thermoplastic facade panels. Beautiful and comfortable panels with which you can realize a lot of design ideas. Their ease of installation and affordable price allow you to quickly and tastefully decorate almost any home.

Video lesson on the installation of facade panels

Today, there are a huge number of materials with which it is possible to decorate your home both inside and out. Check out the informative video tutorial on installing cladding panels

In order to give a stylish look to your dacha or country house, you should use facade panels for the exterior of the house, which will not only embellish, but also protect your building. The only drawback of this type of cladding is the need for an experienced team of builders who can properly mount the entire structure.

Building technologies do not stand still, and traditional cladding materials have been replaced by panels for decorating a house outside, which are considered today the simplest way of effective cladding. A large selection, practicality and low cost make them more and more in demand in housing construction, and installation work is quite within the power to carry out without the involvement of specialists. Finishing with modern panels on the outside is the fastest and most inexpensive way to make your home beautiful and cozy.

The simplest and most practical among the ways of facing a house from the outside is considered to be sheathing with panel materials. Their advantages have already been appreciated by the owners of private housing, who decided to prefer high-tech innovations to the immortal, but already slightly making room for the classics on the pedestal of popularity. After all, the use of panels for exterior wall decoration of a building, offered today by manufacturers for every budget and taste, can successfully solve several problems at once, unlike traditional methods.

The indisputable advantages of the most up-to-date solution:

economical acquisition and ease of installation;
the richest choice of colors and textures;
the possibility of imitation of natural cladding;
complete environmental safety;
increased fire resistance;
reliable protection of walls from destructive processes;
insulation of premises from noise and heat loss;
low maintenance and durability.

The use of panels for finishing a private house from the outside will allow, without additional costs for insulating materials, in a short time to make the cottage not only beautiful, but also comfortable, providing warmth and silence. High-quality paneling protects the walls from getting wet, the insulation layer from the wind, and the ventilation layer guarantees excellent air exchange. A healthy microclimate reigns in a house lined on the outside with waterproof breathable panels, since the development of pathogens under the influence of high humidity is excluded.

The components used in the production of high-quality modern materials for housing construction are characterized by a minimum release of toxins even when used in extreme acceptable conditions. Environmental tolerance is the most important quality when it comes to choosing how to finish a family mansion, even on the outside. But the outer coating in harsh climatic conditions must also be adapted to a wide temperature range, so most panel cladding materials can easily withstand the operating mode from -50ºС to +80ºС.

Decorative trim is designed for a long service life, during which it retains not only its original properties, but also its impeccable appearance. Aesthetic panels for finishing the house outside do not fade in direct sunlight, are not susceptible to aggressive precipitation and mechanical damage, thanks to a durable outer coating, serving as a truly reliable protection. Contaminants do not penetrate through the moisture-proof layer and are easily removed without the help of special detergents, so the cladding is very easy to clean.

Stages of installation of facade panels

Most modern homeowners turn to exterior decorators, but there are also craftsmen who prefer to do their own cladding work. Paneling is suitable for self-assembly like no other material. With some building skills, there is nothing difficult in decorating the outside of a standard private house with panels. An experienced master will be able to solve this problem even alone, but in the absence of sufficient qualifications, it is better to choose assistants.

Competent installation consists of a sequence of steps:

surface cleaning from external structures and decorative elements;
checking the level and leveling the walls when defects are found;
repairing window and door openings in case of damage;
installation of wooden or metal crates with dowels;
installation of panels from the lower level, taking into account deformation gaps.

Insulation installation.

If desired or necessary, an additional layer of insulation can be placed between the wall surface and the crate. As a heater, sheets of mineral wool, expanded polystyrene and other synthetic materials with the appropriate characteristics are used. The installation of panels for finishing the house outside on the crate is usually done with self-tapping screws, and docking with each other is carried out using special locks. Installation with strict adherence to technology does not take much time and does not require the use of professional equipment.

Types of facade panels

Any in-demand product is widely represented on the market, and paneling is no exception. Today, manufacturers offer many options in different price segments that can satisfy any consumer needs. Facade panels are produced not only with polymer decorative coating, successfully imitating natural materials, but also with natural. From the presented assortment, each owner can easily choose to decorate his house from the outside. best option with the required characteristics.

Modern panels are:

fiber cement;
wood fiber;
vinyl;
metal;
stone;
porcelain stoneware;
glass.

Fiber cement panels are produced on the basis of mineral components with an outer coating of inorganic film and additional layers of plasterboard and gypsum fiber. Fiberboards are used as an imitation of natural wood cladding. Universal plastic, from which vinyl panels are made for finishing the house outside, is able to imitate anything. Metal plates are produced from galvanized or aluminum, between the sheets of which there is a heater. Stone, porcelain stoneware and glass allow you to achieve stunning effects.

In any building, appearance plays an important role. Interior trim and decor will noticeably fade if the outside of the house looks more like an old barn with peeling paint. And on the contrary, an interestingly beaten facade will give even a modest dwelling beauty and attractiveness. Previously, walls were built from natural materials (stone and wood), but today not everyone can afford them.

Facade cladding panels imitating bricks, boards, ceramics and concrete are in great demand. Due to their low price and variety of shades, they remain an affordable building material for everyone.

What are "cladding panels"?

The development of the construction segment has led to the emergence of new materials for facade cladding, which have excellent physical properties and low cost. Thanks to them, construction has become much cheaper, and buildings more durable. The main function of facade cladding panels is to protect the walls from external influences and decorate the building. They are used in the design of facades of residential buildings and public buildings: shopping centers, entertainment and sports complexes, educational institutions, shopping centers, hotels and other establishments.

Compared to other façade cladding materials, they have a number of advantages:

Facade cladding panels are suitable not only for the design of new buildings, but also for the renovation of old ones.

Kinds

Facade cladding panels divided into several types according to the materials used in their creation. Most often you can find the division of panels into:

metal;
plastic;
Ceramic, concrete and stone;
woody.

Metal

These facade panels are most often based on aluminum or galvanized steel. These durable plates are highly resistant to rust, are the most fire resistant, are not subject to deformation and attack by acids and solvents. They withstand temperature fluctuations from -50С to +80С and serve from 20 to 50 years. Steel options are distinguished by excellent evenness, while aluminum ones, on the contrary, easily take the desired shape without losing properties.

Some metal panels for the facade are additionally insulated with stenolite and polyalpan. In the latter cases, they can have a matte or glossy surface, imitate wood or plaster.

This group also includes facade sandwich panels: they consist of three or more layers. Between the two outer metal layers there is a pressed plastic 2-7 cm thick and a vapor barrier layer. Such facade panels have excellent soundproofing properties and keep warm.

The disadvantages of some metal facade cladding panels is low heat saving. In addition, the joints of sandwich panels can freeze in severe frost, which should be taken into account when choosing facade materials.

Plastic

Plastic facade panels are also called vinyl siding. Its service life is over 50 years and can withstand temperatures from -50°C to +50°C. The material is extremely resistant to dirt, chemicals and moisture, it does not fade or fade in the bright sun, which is especially useful for facade cladding in sunny places.

Many facade cladding panels consist of from a mixture of PVC and natural wood. This allows you to get high resistance to wear and pest attacks. Additional protection from the sun, moisture and precipitation is provided by an external transparent coating, which the panels are treated with during the production process.

In turn, wood not only helps to get a natural shade, but also perfectly retains heat inside the building and is an environmentally friendly material. The most commonly used shavings coniferous trees as the most frost-resistant. They tolerate aggressive environments well and are adapted to harsh weather conditions.

Thanks to a huge palette and a variety of available colors, this type of house facade cladding is the most popular. It is easy to use, does not require special costs for installation and operation, while it always looks beautiful and tidy and is fireproof. In addition to simple colors, wood-like or stone-like options are available. The coating is produced in the form of large-format sheets, convenient for finishing large volumes.

Ceramics, concrete and stone

Facade facing slabs based on clay do not lose popularity. facade panels porcelain stoneware and clinker have all the natural characteristics of clay, keep heat well and resist wind and fire. Their service life exceeds 50 years, they are also great for making complex architectural elements and look beautiful and elegant at the same time.

Concrete slabs are made from fiberglass and additives that give strength and a beautiful appearance. separate group it is worth highlighting the panels of fiber cement boards. They include cement, cellulose, plastics and mineral aggregates. Facade slabs are durable, heat-resistant, withstand sudden temperature changes, but require preliminary painting. Some fiber cement boards have a thin oxygen film on the surface that prevents the penetration of dirt, due to which the panels do not require special cleaning.

Natural stone is still one of the most expensive and presentable facade materials. Panels for the facade of the house made of this material will serve for a long time without losing the quality and beauty of the finish. Without the need for extra decorations, the stone looks best in a simple cladding option. More cheap option- an artificial stone that will allow you to turn a room into a cave, and the house itself into an old castle.

Wood

A significant number of panels for cladding the facade of a house are made from a mixture of PVC and natural wood. This allows you to get high resistance to wear and pest attacks. Additional protection from the sun, moisture and precipitation is provided by an external transparent coating, which the panels are treated with during the production process.

In turn, wood not only helps get natural color, but also perfectly retains heat inside the building and is an environmentally friendly material. Most often, shavings of coniferous trees are used, as the most frost-resistant. They tolerate aggressive environments well and are adapted to harsh weather conditions.

The high cost of facade building materials led to the fact that more and more builders are abandoning natural stone and wood in favor of more durable and practical materials for facade work. hide the walls and cladding panels imitating stone, brick, wood, concrete or simply painted in the right color help to give the building a neat look.

Due to the ease of use and ease of installation, they are becoming more popular and in demand. Additional advantages are their physical properties: heat and sound insulation, fire resistance, no need for washing, resistance to external aggressive environment, rust and mold.