The best economical heaters. Economical new generation electric heaters: an overview of the best models and reviews

The Stiebel Eltron CNS 150 S heater comes with special mounts that make it easy to mount it on the wall. The principle of operation of this convector is the movement of air. Cold air enters it through the lower grilles and, passing through the heating element, heats up and goes up. The set temperature will be maintained by the thermostat, and with the help of the regulator it can be set with an accuracy of 1 degree. The absence of fans guarantees quiet operation.

The moisture-proof case allows you to install it in bathrooms or on balconies. Overheating protection makes operation safer. The frost protection function turns it on at temperatures below 50 degrees. You can use both independent heating and additional heating.

Pros:

• Comfortable.
• Quiet.
• Reliable.
• Heats up quickly.

Minuses:

• There is no auto-off feature.
• There are slight clicks of the thermostat during heating.

1 NeoClima ТЗТ-508

Even on summer evenings, it can be uncomfortable in the country during rains or unexpected cold snaps. The problem is solved by modern heaters for summer cottages, which quickly and safely heat the air in the room and protect the home from destructive dampness. The thermal technology market is full of heat sources, but not all of them are suitable for use in country conditions. An overview of suitable options will help you make the right choice and avoid unnecessary heating costs.

Electric heaters: an overview of modern models

Electricity is provided to almost all holiday villages, therefore, first of all, for fast and safe heating, electric heaters are most suitable for giving. The choice of type of heat source depends on the thermal insulation of the house, its size and frequency of visits.

Infrared heaters: fast heat

An infrared heater for summer cottages is an economical and practical solution, ideal for poorly insulated buildings that are drafty. The secret is that infrared radiation quickly and directly heats objects and bodies, not air. Thanks to this, it becomes comfortable already at 15-16 degrees of temperature in the room.

Ceiling infrared heater

If the house is operated year-round, then it is recommended to install a permanent ceiling heater or wall panels - they will perfectly cope with heating tasks at any time of the year. When you need a heating device in case of an unexpected summer cold snap, you can get by with a compact film heater-picture or new development called "good warmth". To create a romantic atmosphere and decorate the interior, modern electric fireplaces are ideal, in which economical infrared heaters based on carbon film are built.

"Kind heat" - a unique heater in the fabric

Air heat: electric convectors

Convector electric heaters can only be considered if the country house is well insulated and equipped with high-quality windows, otherwise the heat will leak into the cracks, and electricity bills will empty the wallet. The principle of operation of the convector is simple and based on the laws of physics - the device continuously heats the cooled air that enters the body. For quick heating of a country house, a convector with forced ventilation is suitable - fans significantly accelerate air exchange.

Convector heating devices can be placed on the walls, like the usual water batteries, or installed in the right place on the floor. Mobile structures equipped with wheeled stands are convenient to move from room to room, while stationary models are ideal when the heat source is not planned to be used in several rooms.

Compact floor and wall convector

Almost all modern electric convectors are produced in waterproof cases, so they are not afraid of wet air and dampness. To protect summer property from damage, it is recommended to install devices with an anti-freeze function - they operate in an economical mode, maintaining a minimum temperature.

Fan heaters: short-lived comfort

Electric heat guns immediately after being connected to the network begin to blow hot air. Near the fan heater, you can keep warm by directing warm flow in the right direction, but it will take a long time to raise the temperature in the room. Heat guns, like convectors, do not make sense to use in rooms with drafts.

The most efficient in this segment are electrical appliances with a ceramic heater, they practically do not dry the air and do not burn oxygen. Modern devices are equipped automatic shutdown from overturning, thermostats, temperature controllers. If desired, it is easy to find a model with protection against moisture. However, appliances of this type should not be left unattended, so they should be considered as an inexpensive and quick, but temporary measure to help keep you warm on a cool evening.

Slow and continuous heat: oil coolers

Well-known oil-filled electric radiators can often be found in country houses, where they are used for intermittent and continuous space heating. A few years ago, this heat source was considered the best heater for summer cottages, but now it can only be recommended as an inexpensive device for houses with permanent and temporary residence.

Modern oil cooler with fan

When buying an oil heater for the country, you should pay attention to models with fans that accelerate the distribution of hot air. Radiators of the latest generation are equipped with high-precision thermostats, anti-tilt protection and a restart function, which allows you to safely leave them unattended for a while. A huge plus is that the heated metal radiates heat for a long time after being turned off. The disadvantages of an oil cooler include heavy weight, slow heating of the room, and a flammable body.

New approach to heating: monolithic quartz heater

Monolithic quartz heaters for summer cottages are just perfect! They are highly efficient, economical, safe and give off heat for a long time after switching off, which allows you not to freeze in the event of a short power outage. These compact and stylish heat sources can work without interruption and constant monitoring throughout the heating season. To organize permanent heating, it is recommended to mount a system of several modules.

Monolithic quartz heater - a new source of heat for summer cottages

A monolithic heater is a plate made of a special solution, the main component of which is quartz sand. Inside the stove there is a heating thread that heats up the body. The tightness of the design prevents air and moisture from entering the heating element - this prolongs the life of the device and makes it versatile and safe.

Diesel heaters: warm under any circumstances

Now it's time to talk about which heater is better to choose for a summer residence if there is no electricity in winter. This issue continues to be relevant, as some summer cottages in the winter season, they are completely disconnected from civilization. The best option– heaters running on diesel fuel.

Modern liquid fuel heat sources are safe and equipped with automatic overheating control and protection systems. Special attention should be paid to ovens with the possibility of cooking - these will not only warm, but also feed.

Powerful indirect heating diesel gun

When choosing a diesel heater for a summer residence, it should be borne in mind that only modifications of indirect heating, equipped with a chimney that brings combustion products outside, are suitable for residential premises. Diesel guns of direct heating are suitable only at the construction stage - they are not intended for heating residential premises in which people stay for a long time.

Fast and reliable: gas heaters

Gas country heaters work from bottled liquefied gas. The most economical and safest in this segment are infrared devices. The principle of their operation is simple: the flame of the burner heats the ceramic plates, the infrared radiation from which quickly heats the people and objects present in the house.

During combustion, only carbon dioxide and water vapor are released. Control systems carbon dioxide stop the fuel supply in case of excess of its concentration in the room. For the fastest possible warm-up, we recommend paying attention to models with fan heaters.

New generation gas heater

For those who are even more confused by learning about diversity options We recommend that you seek professional help. Before choosing a heater for a summer residence, he will calculate the required power of the device and take into account all important features country house.

Video: how to choose a heater for a summer residence

Home heaters are used as a permanent or temporary means of heating rooms. Despite the constant increase in electricity tariffs, domestic space heaters continue to be in high demand among the population. However, an increasing number of consumers are beginning to think about the effectiveness and expediency of using these devices. Today manufacturers different countries world focus on the development and production of a new type of heating devices. The use of nano-technologies has made it possible to create economical heaters whose energy consumption is much lower than that of analogs made in the last century. That is why the new generation of economical electric heaters continue to compete with heating systems powered by gas, coal and solar energy. To understand why the new economical heaters for summer cottages continue to remain at the peak of popularity today, it is necessary to briefly dwell on their merits.

Advantages of new generation heaters

More recently, the consumer did not particularly think about which heater is more economical, efficient and safer. The efficiency of these devices was of interest to everyone in last turn. However, modern realities have forced people to reconsider their approach to heating residential premises. The issues of saving are gradually coming to the fore even for the wealthy category of citizens. Despite everything, they strive to purchase the most economical heaters, rightly counting on their payback in the foreseeable future. And in this their hopes are absolutely justified from all points of view.

The most economical electric heaters are distinguished by the following advantages:

The economical heater of the new generation is made with a large margin of safety and reliability. Its service life can be 30 years or more.

How to choose a heater (video)

How to choose an electric heater

Before choosing the most efficient heater for space heating, you need to familiarize yourself with the device and the principles of operation of devices of this type. If we are talking about an apartment in a multi-storey building, then you should purchase a portable and powerful electric heater that can maintain the temperature in the apartment in case of accidents on heating mains. When the problem is fixed, the heater for the apartment is packed and put away for storage.

As for a country house or cottage, there is a different approach. It is advisable to purchase low-power wall-mounted heaters, lay a separate line to them and equip them with control devices. This will allow you to turn the heating system on and off at the right time, including remotely. To do this, use a tablet, computer or smartphone.

When choosing a home version of the heater, you must follow the following criteria:

Possibility of self-assembly and connection. This will save time and money on the services of a specialist.

The safety of the device in terms of leakage of electricity and the likelihood of fire. The presence of an automatic shutdown device in the event of a malfunction.

Ratio of parameters power/heating area. Appliances with high electricity consumption may not be profitable compared to charcoal or wood burning stoves.

Methods of raising and maintaining the temperature in the premises. Sometimes the speed of warming up a room is especially important.

In order to determine which heaters are the most economical and efficient, it is necessary to briefly dwell on those products that are currently on the market for this group of products.

Thermal fans

The use of this type of instrument is the best option solving the issue of how to quickly and efficiently warm up a room, even a large area. The fan heater consists of a casing, inside of which there is a spiral and a fan. Control devices allow you to adjust the level of heating of the spiral and the speed of rotation of the fan. Modern models are equipped with a timer, a relay, a shutdown button when the device falls, a rotary mechanism and a remote control. To avoid burning oxygen, ceramics are used to cover the heating elements. As a rule, fan heaters are used as auxiliary devices when you need to quickly raise the temperature of the air in the room.

Their disadvantages include:

a fairly high level of noise generated by the operation of the fan;

rapid wear of rotating parts;

the need for regular maintenance (disassembly followed by cleaning of the blades and lubrication of the bearings);

heat air near the safety grille.

The undoubted advantage of the fan heater is its compactness and durability. It can be carried without special precautions in a bag or simply in the trunk of a car as a camping heat source when leaving for a summer cottage.

Convector type devices

Quite simple and effective devices for maintaining the optimal temperature regime in residential and utility rooms. The principle of their operation is based on the property of warm air to rise up and fall down when cooled. Heating of the room occurs due to the movement of warm air and from the body of the device. The heating element is located inside the metal case. Cold air enters working area device, heats up and rushes to the ceiling. Passing through the entire volume of the room, the air cools down and enters the device again. The process is repeated until the thermostat opens.

As a rule, convectors are installed permanently on the walls. This is necessary so that there is enough space under them to take in cold air and give it translational movement throughout the space of the room. If you purchase a product equipped with a chassis and handles, then you can freely move it from room to room or even take it out of the house. Such a decision is necessary when it is necessary to heat one of the premises of the dacha, which for a long time stood without owners in an unguarded area.

Convectors have the following advantages:

simplicity and reliability of the design;

lack of moving parts that wear out quickly and create noise;

light weight, which allows you to mount a convector electric heater even on panel walls made of chipboard;

high efficiency at low cost;

affordable cost.

However, even the best convector-type heater will not cope with rooms with very high ceilings. Streams of hot air will cool down at a height, not reaching the floor. In the absence of good ventilation, the air quickly becomes stale, causing headache and allergies.

The most economical heaters (video)

inverter heaters

Devices of this type work on the principle of conversion alternating current into permanent. The inverter heater has one of the highest efficiency among electrical counterparts. These devices are installed in modern air conditioners that combine the functions of cooling and heating. When freon is converted from a liquid to a gaseous state, the radiator grilles are heated. Air is passed through them, the flow of which can be regulated in a wide temperature range, according to the intensity of flow and direction.

The main advantages of inverter type devices are as follows:

the inverter unit ensures smooth changes in all parameters of the device;

access to a given temperature regime is carried out quite quickly, which is necessary for accelerated heating of the room;

when the fan is running at low speeds, there is practically no noise from it;

distribution of air flows occurs evenly due to the possibility of adjusting the mode of movement of dampers and blades;

good performance with low power consumption.

However, the inverter device also has its disadvantages:

relatively high price compared to heating system on coal or gas;

a complex device, the elements of which are sensitive to voltage drops in the network;

when the outdoor temperature is below -10ºС, the compressor stops working;

installation, adjustment, repair are carried out only by specialists.

The radiators of the inverter air conditioner must be cleaned annually using special liquids. This procedure is quite possible to perform independently.

Oil coolers and panels

Devices of this type are made in the form of standard heating radiators or corrugated panels in a vertical orientation. The case of products is made of the steel covered with heat-resistant paint. A heating element is placed inside the case, reliably isolated from its steel walls. As a rule, the heating element is located at the bottom of the radiator. The heat carrier is technical oil obtained during the distillation of oil. The body of the device is sealed and durable, which eliminates the possibility of oil leakage and burnout of the heating element. Radiators are equipped with a temperature controller, a timer and a fan to speed up the process of heating the room.

The advantages of an oil cooler are as follows:

simplicity and reliability;

affordable cost;

possibility of carrying and transportation;

long cooling time of the coolant after power off.

However, this device has several disadvantages:

slow injection of the required temperature;

low productivity at significant cost.

It is expedient to use an oil radiator as a backup or additional source of heating for small premises.

Ceramic and stone panels

These are modern and completely safe products, produced in stationary and mobile versions. Stationary panel options are mounted on the walls. Mobile models have legs or wheels, depending on the weight and size. The heating element is built into the panel, it is reliably protected from mechanical influences and moisture.

An economical ceramic home heater has a surface that imitates natural stone, fabric or wood. Models of the elite class have a front finish made of natural stone, marble or granite. The cost of such devices differs significantly from standard modifications.

The advantages of ceramic panels are as follows:

presentable appearance;

low level of electricity consumption;

uniform distribution of heat over the entire surface;

compactness and accuracy of devices;

long service life;

safe working area temperature.

The disadvantage of ceramic panels is the relatively low level of thermal energy production. A large room requires several of these products. This may call into question the appropriateness of choosing such heaters.

Infrared heaters

Today, radiators of this type are becoming more and more popular due to their high efficiency. In modern models, this figure can reach 92%. The main difference between infrared emitters and other household appliances is that they heat objects and objects, not air. Interior items heat up and transfer heat energy to the air. As a result, double heating of the room space occurs.

When buying an infrared heater, you need to pay attention to the size of the reflector and the power of the radiation source. It is advisable to purchase large-width models with a lamp with a power of not more than 400-500 watts. Only in this case can a sufficient level of savings be achieved.

The devices are mounted on racks with adjustable height. If necessary, the emitters can be mounted on a wall or ceiling. This solution allows you to save the usable area and volume of the premises. The advantages of IR emitters are best manifested when heating rooms with high ceilings.

Separately, it is worth dwelling on sources of infrared radiation of the film type. They are installed under the floor of boards and parquet. Finishing coating is heated up to 25-28ºС. This is quite enough to evenly heat a room of any size and configuration.

The main advantages of infrared devices are:

compact size;

high performance at low cost;

the possibility of heating a certain object or part of the room;

almost instantaneous set power;

lack of noise and smell during operation;

versatility in relation to heated rooms;

low case temperature in the on state;

reliability and durability.

The use of infrared emitters is an excellent choice for rooms that are not heated during the cold season. So, under the rays of the device, you can sleep in a cold room or have a good time in an icy gazebo, enjoying the warmth coming from the reflector.

Conclusion on the topic

The increase in heating tariffs has become an incentive to improve electric heaters. Today, these devices are becoming more economical and more functional. Right choice products with certain technical characteristics will allow you to maintain an optimal level of heat at minimal financial cost.

And some secrets...

Have you ever experienced unbearable joint pain? And you know firsthand what it is:

• inability to move easily and comfortably;
• discomfort when going up and down stairs;
• unpleasant crunch, clicking not of their own free will;
• pain during or after exercise;
• inflammation in the joints and swelling;
• causeless and sometimes unbearable aching pain in the joints ...

Now answer the question: does it suit you? Can such pain be endured? And how much money have you already "leaked" for ineffective treatment? That's right - it's time to end this! Do you agree? That is why we decided to publish an exclusive interview with Professor Dikul, in which he revealed the secrets of getting rid of joint pain, arthritis and arthrosis.

In apartments or private houses, supplementary heating with electric radiators may be required. Usually this caused a large expenditure of electricity, and therefore money. In today's markets there are economical electric heaters new generation, which do not require high consumption electric current. Consider the design features, how to choose the right heater and the rating of popular models.

Wall convector (location method in the room)

Economical electric heaters of a new generation: types and their features

When choosing an economical new generation radiator, pay attention to the following criteria:

• Ease of installation so that no specialist services are required.
• The ratio of the heating area and the cost of electricity to make it really profitable.
• Reliable safety performance.

In order to understand, we will consider in detail all types of electricity.

Quartz infrared heaters

The heating element in quartz infrared radiators is a tube-like lamp, which is protected by a metal case. Unlike other types of heaters, it does not heat the space, but a certain area or object to which the equipment is directed.

At the same time, the efficiency of the most advanced models reaches 90%. When you choose an economical option for yourself, pay attention to the lamp itself. For example, halogen absorbs more electricity.

The use of infrared quartz heaters in the form of a film is popular, it has a low heating temperature, therefore it is used inside walls and floors, with an additional coating with a layer of foil to reflect heat.

Note! Even after a power outage, film heaters retain surface heat for a long time.

Advantages of quartz devices:

• Suitable for any type of premises;
• Few electricity costs;
• The case practically does not heat up;
• Holds heat for a long time and quickly gains temperature;
• No unpleasant odors during operation;
• Reliability and durability.

The disadvantages include the massiveness of quartz structures of the usual (not film) type.

Oil coolers

This is the most popular model. Of all heaters, only oil heaters are called radiators. The principle of operation is reduced to heating any liquid inside the container. And this liquid acts as a heating element.

Such heating devices have good specifications, do not emit unpleasant odors, and long-term use is also allowed. There are stationary and mobile versions, additionally may have .

Advantages:

• You don't need a specialist to connect;
• Low price;
• Able to maintain the resulting temperature;
• There is an automatic shutdown mechanism, which saves energy consumption.

Note! Not suitable for small spaces and additional child protection should be provided as the appliance itself becomes hot.

But thanks to automatic operating modes, it can be attributed to one of the most economical heaters for the home.

Ceramic heating panels

It is possible to carry ceramic models to economic electric heaters of new generation. The appearance of such products occurred recently, but due to their effectiveness, they quickly gained popularity among consumers.

Such equipment includes:

• The case is monolithic;
• Ceramic elements;
• Heat-resistant cable that serves as a heating element.

A distinctive feature is the combination of two heating options: convection and infrared. The room heats up quickly and evenly.

The advantages of the model include the following:

• This type of heating is suitable for any buildings and premises;
• Does not cause harm to health;
• The ceramic panel consumes 370 W of power and consumes no more electricity than a conventional TV;
• Automatic control;
• Safe for children, as they have special protective elements;
• Ease of care and durability.

Useful information! do not install such a heater in niches, as this leads to a decrease in performance.

Ceramic panels can be attributed to electric radiators for summer cottages (wall-mounted and economical) or for the home due to their versatility in location.

Convectors and their advantages

Economical electric heaters of the new generation are among them. They have a directed action on a certain heating area, and the heat is supplied very quickly.

Works on the principle of air circulation. The cooled stream from above descends, passes through the convector and thereby heating occurs. This cycle is repeated several times until the automatic shutdown is activated.

The advantages include:

• Ease of operation;
• Light weight;
• Low price.

Although the air in the room will heat up quickly, it will raise dust. Therefore, it is not recommended for people with allergies to use it.

Useful information! To increase efficiency, use wall-mounted electric heaters with a thermostat.

Thermal heaters

Not the most popular for residential premises are thermal heaters. They work on the principle of heating air, passing it through the heater with the help of a fan.It has a local effect, so it is rational to use it as an additional source of heat or to heat rooms where people are not constantly located, for example, change houses.

Thermal heaters have several disadvantages, which include noise and quick failure of parts, as well as too high air temperatures near the equipment.

Which heater is better for an apartment and more economical

To choose the right electric heater for yourself, you should decide on the following parameters:

• Area of ​​​​the room (what power is required);
• How fast should the temperature rise;
• The presence of children (whether protection from burns is needed);
• The price you are expecting.

When you decide on all the parameters, you can look at the selected type of reviews and offers of the modern market. The table below shows the models that are considered popular.

Table 1. Average cost of economical electric heaters

Image	Model	Short description	Power, kWt	Heating area	Cost in rubles
	Ballu BEP/E 2000	Convector, electronically controlled, wall-mounted	2	25	6000
	Sencor SOH 3109BK	Oil with stepped mechanical adjustment	2	25	3000
	Electrolux EFH/S-1120	Thermal with mechanical control, but automatic shutdown	2	25	1500
	Neoclima NC-CH-3000	Floor infrared heater with automatic switch-off	3	30	5000

For each type of heater, you can find your rating and choose the right option for you. You can also look at customer reviews.

For example, you can read the following about Neoclima NC-CH-3000:“I got it a long time ago, it is stable and the air does not dry out, but I would like to wish the developers to add another mode to reduce the temperature. Either way, great value for money!”

Calculator for calculating the required power of an electric heater